Surrey · England

Non-slip bath & shower coating in Milford, Surrey

Non-slip bath coating for Milford, without a refit. Send us photos for a fixed price, then we come to you.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Milford?

FAQs for Milford

What do you need from me?

Send photos through the quote form or call 0345 017 0787.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

What happens next?

We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Can you repair something that’s been repaired before?

Most of the time. Tell us what was done before.

How we handle non-slip bath coating in Milford

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. We regularly repair wet room floors (ask us), shower trays and enamelled baths, and common reasons people contact us are bath mats that harbour mould or get forgotten and safety for older or less mobile people.

The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Milford (GU8)
Area hub
Surrey
Warranty
A year, on every repair
Quotes
Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We are used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.

How it works

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which typically takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, generally overnight.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Clear toiletries, mats and anything else from around the area
  • Plan for the room to be out of bounds to pets and children

Get a quote

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.

Send photos for a quote

Read more

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Prices and what affects them

Every quote is fixed and free. What we look at:

  • How much damage there is
  • How easy the damage is to reach
  • Whether we combine several jobs
  • The type of damage

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Natural light rather than flash
  • Your postcode, so we can check dates
  • A photo taken from further back
  • Whether it’s been repaired or coated before

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Milford and nearby

Milford is about 6 miles south-west of Guildford, in Surrey. From the centre of Milford to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Milford is one of 395 places in Surrey we cover. You can also see our page for London, about 33 miles away.

We cover every part of GU8 and the streets around it. Whether you live on Church Road, Upper Manor Road and Elmside or anywhere nearby, a technician can come to you. If you are just outside Milford, we cover Mousehill (1 mile south-west), Cramhurst (1 mile south), Upper Eashing (1 mile north), Ockford Ridge (1 mile south-east) and Lower Eashing (1 mile north). Within a short drive, we also cover Guildford (6 miles north-east), Woking (10 miles north), Camberley (12 miles north), Farnham (7 miles north-west), Dorking (14 miles east) and Frimley (10 miles north).

Around Milford

Around Milford, we work in homes near Milford School, Rodborough and The White Lion pub, among other places. You will also find Rodborough Common (0.9 miles south-west), St Hilary's School (1.5 miles north-east) and St John the Evangelist's Church (within half a mile south). The nearest railway station is Milford (Surrey) station, about 0.8 miles south-east of the centre. Nearby you’ll also find Godalming Museum (1.7 miles north-east) and Milford Hospital (1 mile east). Not far away are Lower Lake and Frith Hill.

Map of Milford © OpenStreetMap contributors

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • A fixed quote before booking
  • No extra charge for your area
  • Dust sheets down, tidy finish
  • A year’s guarantee on all work

See our prices page.

When a repair isn’t the answer

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths

Do you need non-slip bath coating in Milford?

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

The things clients usually mention when they call are:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

What your quote should include

  • How your room will be protected
  • Whether cleaning and preparation are in the price
  • Aftercare advice
  • Whether there are any call-out or travel charges

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.