Brighton and Hove · England
Non-Slip Bath Coating for Moulsecoomb homes
Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Moulsecoomb. Send pictures for a free, fixed quote.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Non-slip bath coating at your home in Moulsecoomb
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We work on shower trays, acrylic baths and enamelled baths, and the jobs we see most are bath mats that harbour mould or get forgotten and worn-out textured areas.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Where
- Moulsecoomb (BN2, BN1)
- Area hub
- Brighton and Hove
- Cover
- One year on every repair
- Quotes
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Moulsecoomb
Moulsecoomb is about 1 mile north-east of Brighton, in Brighton and Hove. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in all 30 towns and villages across Brighton and Hove. You can also see our page for London, about 45 miles away.
Here we cover the BN2 and BN1 postcode area. You will find streets such as Natal Road, Lewes Road and The Avenue, all of which we cover. We also travel to Bevendean (1 mile south-east), Hollingdean (1 mile west), Hollingbury (1 mile north-west), Brighton (1 mile south-west) and Hanover (1 mile south-west). Further out, we also cover Brighton and Hove (4 miles west), Hove (3 miles west), Aldrington (4 miles west), Hangleton (4 miles west), Saltdean (4 miles south-east) and West Blatchington (3 miles west).
Landmarks near Moulsecoomb
Locally, our jobs take us to homes close to Wild Park, Brighton Aldridge Community Academy and The Bevy pub. Also close by are Moulsecoomb Primary School (under half a mile north), St. Andrew's (within half a mile south-west) and University of Sussex Library (1.5 miles north-east). Moulsecoomb has its own railway station: Moulsecoomb station. Nearby you’ll also find Churchill Square (2.3 miles south-west) and Clayton Castle (4.6 miles north). For a walk, there’s Bevendean Down and Newmarket Hill.
Your questions about non-slip bath coating in Moulsecoomb
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
How much does non-slip bath coating cost in Moulsecoomb?
We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your BN2 postcode.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
What areas do you cover?
We cover the entire UK, including Moulsecoomb and the rest of Brighton and Hove. Just include your postcode and we will offer you dates.
Will I see the coating?
Very little: the treated area looks slightly matt.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What do you need from me?
Photos of the damage, a picture of the entire bath or shower tray and your postcode. After that, we just agree a date.
Nearby places to Moulsecoomb
Other services in Moulsecoomb
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes a few hours. If anything looks different from your photos, we will talk to you before going ahead.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, normally overnight.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
How to get a price
Upload pictures of the damage and one of the whole item, with your BN2 postcode, and we’ll come back with a fixed quote.
Read more
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Common problems we fix in Moulsecoomb
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Contact us if you’ve noticed any of these:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
What to look for in a quote
- The length of the guarantee and what it covers
- If travel is included in the price
- Who will actually do the work
- How the colour is matched
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
When a repair is not the answer
In fairness, there are a few things a repair won’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly.
What we work on
- Enamelled baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
- Resurfaced baths
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Moulsecoomb
- Honest advice, even when it means no job
- Every repair guaranteed for a year
- A fixed quote before you book
- Rooms protected and left tidy
See our prices page.
What non-slip bath coating costs
Quotes are free and the price is fixed. What we take into account:
- What kind of damage it is
- Doing more than one item at once
- Access to the area
- How much damage there is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- A photo taken from further back
- Whether it’s been repaired or coated before
- The material, if you know it
- Your postcode, so we can check dates
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
