Blaenau Gwent · Wales
Non-Slip Bath Coating in Mountain Air
Non-slip bath coating in Mountain Air without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
How we handle non-slip bath coating in Mountain Air
It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. We regularly repair resurfaced baths, acrylic baths and enamelled baths, and the jobs we see most are worn-out textured areas and safety for older or less mobile people.
Big or small, it’s backed by a one-year guarantee. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Location
- Mountain Air (NP23, NP22)
- County
- Blaenau Gwent
- Warranty
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- We leave the room as we found it
Read our prices page.
When a repair isn’t the answer
Some jobs are not right for a repair, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we work on in Mountain Air
- Wet room floors (ask us)
- Enamelled baths
- Acrylic baths
- Shower trays
- Resurfaced baths
Landlord and trade work in Mountain Air
We regularly work with letting and managing agents. Send the address, photos and access details.
If you manage property in Mountain Air, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Mountain Air: your questions answered
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
Do you come to Mountain Air?
Yes. We work across the UK and travel to Mountain Air. Send photos and we will quote, or call 0345 017 0787.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How we price non-slip bath coating
You will know the full cost before booking. We look at:
- Whether we combine several jobs
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
Most quotes are done from photos alone. To help us price it:
- A wider photo showing the whole bath or shower tray
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
Most clients in Mountain Air get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Mountain Air and the surrounding area
Mountain Air is about 1 mile south-west of Ebbw Vale, in Blaenau Gwent. Jobs in Mountain Air are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Mountain Air is one of 56 towns and villages in Blaenau Gwent we cover. Our jobs stretch from Mountain Air to Birmingham (about 74 miles away).
Every address in NP23 and NP22 is covered. We regularly work on streets such as Firth Road, Valley Road and Tredegar Road and the roads around them. We also cover the places around Mountain Air: Hilltop (1 mile south-east), Willowtown (1 mile east), Ebbw Vale (1 mile north-east), Badminton (1 mile north) and Newtown (1 mile east). Further out, we also cover Abertillery (5 miles south-east), Blaenau Gwent (5 miles south-east), Penrhiwgarreg (5 miles south-east), Pen-y-bont (5 miles south-east), Rhymney (3 miles south-west) and Llanhilleth (7 miles south-east).
Around Mountain Air
Around Mountain Air, we work in homes near All Saints R.C. Primary School, Christ Church and Glyncoed Comprehensive School and the streets around them. The closest station to Mountain Air is Ebbw Vale Town station, about 0.9 miles east of the centre. Nearby you will also find Ebbw Vale Hospital (0.6 miles south-east) and Festival Park (2.5 miles south-east). Not far away are Glyncoed Lake and Bryn-serth.
Nearby places to Mountain Air
Other services in Mountain Air
The process
You do not need to empty the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a morning or an afternoon, and you can get on with other things while we’re there.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
Getting ready for the visit
- Point us to the nearest place to park
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
What we’re called out for in Mountain Air
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Keep an eye out for these signs:
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Resurfaced baths that are now too smooth
What your quote should include
- How the colour is matched
- Who turns up on the day
- What happens if the damage is worse than the photos show
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
