Cornwall · England
Non-slip bath & shower coating in Mylor Bridge, Cornwall
We travel to Mylor Bridge for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
About our non-slip bath coating in Mylor Bridge
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Common call-outs are for bath mats that harbour mould or get forgotten and worn-out textured areas, across enamelled baths, acrylic baths and wet room floors (ask us).
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Mylor Bridge (TR11)
- Area hub
- Cornwall
- Guarantee
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in Mylor Bridge
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Most people contact us after spotting one of these:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
Comparing quotes
- A fixed price, and whether VAT is included
- If travel is included in the price
- How long it needs to cure
- Whether cleaning and preparation are in the price
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
What non-slip bath coating costs
Prices are worked out job by job, from your pictures. The main factors are:
- How many items we do on one visit
- What the surface is made of
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Quotes from your photos
You can usually get a fixed price without us visiting. To help us price it:
- Where you are, by postcode
- Details of any past repairs
- Natural light rather than flash
- Any details about the material
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
What we cannot put right
Before booking, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Resurfaced baths
- Acrylic baths
- Enamelled baths
- Shower trays
- Wet room floors (ask us)
Mylor Bridge and the surrounding area
Mylor Bridge is about 2 miles north of Falmouth, in Cornwall. From the centre of Mylor Bridge to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 644 towns and villages in Cornwall.
We work across the TR11 postcode area. Whether you live on Church Road, Meadowbank and New Row or a nearby road, a technician can come to you. Close by, we cover Restronguet Passage (1 mile north-east), Trelew (1 mile south-east), Bissom (1 mile south-west), Tregew (1 mile south) and Mylor Churchtown (1 mile south-east). Further out, we also cover Truro (5 miles north), Camborne (10 miles west), Redruth (7 miles north-west), Helston (10 miles south-west), Hayle (15 miles west) and Rosewarne (10 miles west).
Around Mylor Bridge
We visit homes around Penryn College, All Saints and Mylor Community Primary School. The closest station to Mylor Bridge is Penryn station, roughly 1.9 miles south-west. A little further out are St Mawes Castle (3.2 miles south-east) and Penryn Museum (1.7 miles south-west).
For landlords and businesses
Landlords, letting agents and housing providers in Mylor Bridge use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams in Cornwall and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
The process
We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and we leave the room as we found it.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, typically overnight.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
- Let the surface dry out before the visit
Getting a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
Repairing versus replacing in Mylor Bridge
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Mylor Bridge clients choose us
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
- One price list for the entire UK
- Dust sheets down, tidy finish
Read our prices page.
Nearby places to Mylor Bridge
What else we do in Mylor Bridge
FAQs for Mylor Bridge
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Can I add another job to the visit?
Of course, and it usually saves money. Just add the extra items to your photos and you’ll get one combined price.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
About our accreditations · Every repair comes with a one-year guarantee.
