Lancashire · England
Non-Slip Bath Coating for Over Kellet homes
Our repair technicians come to Over Kellet for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
How we handle non-slip bath coating in Over Kellet
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. If you are dealing with worn-out textured areas and a bath or tray that is slippery when wet, we can help, on enamelled baths, acrylic baths and wet room floors (ask us) alike.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Over Kellet (LA6)
- County
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Over Kellet
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Look out for any of the following:
- Safety for older or less mobile people
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Questions to ask before you book
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
- How to care for the finish
- What happens if the damage is worse than the pictures show
How the visit works
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. Allow a few hours, and we will keep you posted as we go.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, typically overnight.
Before we arrive
- Let us know if it has been repaired before
- Have a window or extractor fan available
- Let us know about parking or access
Ask for a price
To get a price, send two or three photos through our quote form or ring us. We will say right away if a repair is the right fix.
Read more
Your questions about non-slip bath coating in Over Kellet
How do I book?
Photos of the damage, a picture of the whole bath or shower tray and your postcode. Then we’ll agree a date.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What does non-slip bath coating cost?
Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your LA6 postcode.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How we price non-slip bath coating
Prices are worked out job by job. The main factors are:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Access to the area
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your photos
We price nearly every job from photos. This is what we need:
- Any details about the material
- Where you are, by postcode
- Natural light rather than flash
- A clear, close picture of the problem area
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. What comes back is a fixed price, not a guess.
About Over Kellet
Over Kellet is about 6 miles north-east of Lancaster, in Lancashire. Customers in Over Kellet get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We cover all 482 towns and villages across Lancashire. Our jobs stretch from Over Kellet to Manchester (about 49 miles away).
Every address in LA6 is within our area. From Kirklands Road, Bay View and Woodlands View or a nearby road, a technician can come to you. Nearby, we also work in Nether Kellet (1 mile south-west), Carnforth (2 miles west), Capernwray (2 miles north-east), Cragbank (2 miles west) and Borwick (2 miles north). We also work in nearby towns such as Lancaster (6 miles south-west), Morecambe (6 miles south-west), Heysham (8 miles south-west), Garstang (15 miles south), Westfield War Memorial Village (6 miles south-west) and Sandylands (8 miles south-west).
Around Over Kellet
Our clients here include homes close to Carnforth High School, St Cuthbert's Church and Eagle's Head pub and the streets around them. Over Kellet’s nearest station is Carnforth station, about 1.6 miles west. Well-known places in the area include Mourholme (1.6 miles north) and Lancaster Moor Hospital (5.4 miles south). Open spaces near Over Kellet include Hawes Water and Warton Crag.
Nearby places to Over Kellet
What else we do in Over Kellet
When we’d advise against a repair
To be straight with you, there are a few things a repair will not fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before booking.
What we work on
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
- Acrylic baths
For landlords and businesses
If you manage property in Over Kellet, we’ll quote for several properties at once. Send photos for each one and we will price them together.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Typically one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your pictures
- Every repair guaranteed for a year
Take a look at our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
