North Lincolnshire · England

Non-Slip Bath Coating for Owston Ferry homes

Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Owston Ferry. Free, fixed quotes from your pictures.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Owston Ferry homes

Non-slip bath coating in Owston Ferry, done in place

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We are often asked to fix bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, in shower trays, enamelled baths and wet room floors (ask us).

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Area
Owston Ferry (DN9)
Region
North Lincolnshire
Warranty
One year on every repair
Quotes
Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Where we work around Owston Ferry

Owston Ferry is about 6 miles north of Gainsborough, in North Lincolnshire. Wherever you are in the DN9 postcode area, we carry out the work at your property. Owston Ferry is one of 90 places in North Lincolnshire where we work. Our nearest city page is Leeds, about 38 miles away.

Every address in DN9 is within our area. From High Street, Station Road and Market Place or anywhere nearby, a technician can come to you. We also cover the places around Owston Ferry: East Ferry (1 mile south-east), Wildsworth (1 mile south), Laughton (3 miles south-east), Blyton (4 miles south-east) and Pilham (5 miles south-east). Further out, we also cover Scunthorpe (7 miles north-east), Bottesford (6 miles north-east), Brigg (13 miles east), Frodingham (9 miles north-east), Crosby (9 miles north-east) and Broughton (11 miles north-east).

Near you in Owston Ferry

Typical jobs here are in homes near St Martin's CofE Primary School, The White Hart pub and Church of St Martin and the streets around them. A little further out are Haywain Farm Museum (3.5 miles north-west) and John Coupland Hospital (5.6 miles south).

Map of Owston Ferry © OpenStreetMap contributors

Repairing versus replacing in Owston Ferry

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • CHAS, Constructionline and SafeContractor accredited
  • Rooms protected and left tidy
  • Work done at your home or business
  • We’ll tell you if it’s not worth repairing

Take a look at our pricing.

Questions from Owston Ferry

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

I’m a tenant. Can you help?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

What happens once I’ve sent photos?

You get a fixed price and available dates. If we need another angle, we’ll ask.

Do you cover Owston Ferry?

We do. We send a technician to Owston Ferry for every job, with no extra charge for travel.

Which areas do you work in?

The whole UK, including all of North Lincolnshire. Just include your postcode and we will offer you dates.

Prices and what affects them

Quotes are free and the price is fixed. What we look at:

  • The type of damage
  • Where the damage is and how we get to it
  • Any earlier repairs that need removing first
  • Unusual colours or finishes

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

Getting a price from pictures

Good photos mean an accurate price. Here’s what helps:

  • The material, if you know it
  • A close-up of the damage, in focus
  • A wider photo showing the whole bath or shower tray
  • Any earlier repairs or coatings

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

What happens on the day

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a few hours. We clean up when we are done and let you know when you can use it again.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, typically overnight.

Getting ready for the visit

  • Keep a parking space free if you can
  • Have a window or extractor fan available
  • Tell us if there are stairs or a lift

Ask for a price

To get a price, send two or three photos using our quote form or ring us. We’ll say straight away if a repair is the right fix.

Get a fixed price

Advice

Landlord and trade work in Owston Ferry

We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

What we can’t put right

To be straight with you, there are a few things a repair won’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly.

What we work on

  • Acrylic baths
  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths
  • Resurfaced baths

Do you need non-slip bath coating in Owston Ferry?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a photo:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Comparing quotes

  • The length of the guarantee and what it covers
  • How long it needs to cure
  • How your room will be protected
  • Whether a trained technician does the job

Our hiring checklist

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.