Somerset · England

Non-Slip Bath Coating in Pitney

Local non-slip bath coating for Pitney: photo quotes, tidy work and a year’s guarantee.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Pitney

The process

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow a few hours from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Let us know which floor the room is on
  • Plan for the room to be out of bounds to pets and children
  • Clear toiletries, mats and anything else from around the area

How to get a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a fixed price

Advice

Non-slip bath coating in Pitney, done in place

It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. We are frequently asked to fix safety for older or less mobile people and bath mats that harbour mould or get forgotten, across enamelled baths, wet room floors (ask us) and shower trays.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
Pitney (TA10)
County
Somerset
Cover
A year, on every repair
Quotes
Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

Repairing versus replacing in Pitney

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why us?

  • We will tell you if it’s not worth repairing
  • No need to remove anything
  • Dust sheets down, tidy finish
  • Work done at your home or business

Read our full price list.

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before you book.

Materials we repair

  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays

What non-slip bath coating costs

You will not pay by the hour. The price is based on:

  • The colour and finish to match
  • Where the damage is and how we get to it
  • What kind of damage it is
  • How many areas need work

Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Getting a price from pictures

You can typically get a fixed price without us visiting. To help us price it:

  • A coin or ruler next to the damage for scale
  • One sharp close-up of the damage
  • Natural light rather than flash
  • Your postcode, so we can check dates

For a price in Pitney, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

For landlords and businesses

For anyone letting property in or around Pitney, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

We work for landlords, letting agents and housing providers in Pitney as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Our work in Pitney

Pitney is about 9 miles north-west of Yeovil, in Somerset. From the centre of Pitney to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 640 places in Somerset.

Postcode districts we cover here: TA10. Jobs here include addresses on Marsh Lane and Stowey Road and the roads around them. Nearby, we also work in Upton (1 mile south), Somerton (2 miles east), Long Sutton (2 miles south-east), Knole (3 miles south-east) and Dundon (3 miles north-east). Further out, we also cover Taunton (14 miles west), Bridgwater (11 miles north-west), Yeovil (9 miles south-east), Chard (15 miles south-west), Wells (12 miles north-east) and Shepton Mallet (14 miles north-east).

Near you in Pitney

Locally, our jobs take us to homes close to Halfway House, Church of Saint John Baptist and Huish Episcopi Academy, among other places. For a walk, there’s West Sedgemoor RSPB reserve.

Map of Pitney © OpenStreetMap contributors

Your questions about non-slip bath coating in Pitney

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Pitney.

How do I get a price for non-slip bath coating in Pitney?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

Is the work guaranteed?

All our work carries a one-year guarantee. We will explain what it covers when we quote.

Is it worth repairing rather than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

It’s been repaired before. Can you still fix it?

Usually, yes. We remove the old repair before doing a new one, so let us know about it.

When to call us in Pitney

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Common reasons people in Pitney contact us include:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

What to look for in a quote

  • What prep work is covered
  • Whether they match the colour on site
  • How the room is protected while they work
  • Who will actually do the work

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.