Dorset · England
Non-Slip Bath Coating in Powerstock
Non-slip bath coating in Powerstock without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
How we price non-slip bath coating
A fixed quote means you know the cost before you book. We take into account:
- How hard the colour is to match
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- The material and finish
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- A wider photo showing the entire bath or shower tray
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
Most clients in Powerstock get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
How we handle non-slip bath coating in Powerstock
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. If you’re dealing with resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, we can help, whatever the material.
Every job is backed for twelve months. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Powerstock (DT6)
- Area hub
- Dorset
- Cover
- 12 months on all our work
- Quotes
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a morning or an afternoon.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
How to prepare
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Nearby places to Powerstock
Also in Powerstock
When to call us in Powerstock
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for these signs:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Questions to ask before you book
- What the guarantee covers, and for how long
- How to care for the finish
- When it can be used again
- How the colour is matched
Common questions in Powerstock
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
What happens after I send pictures?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
How do I get a price for non-slip bath coating in Powerstock?
Because every job differs, we price from photos. You know the full cost before anything is booked.
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What we can’t put right
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly.
Surfaces we repair
- Acrylic baths
- Shower trays
- Wet room floors (ask us)
- Resurfaced baths
- Enamelled baths
Work for landlords and builders
Landlords, letting agents and housing providers in Powerstock use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Should you replace it?
The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Normally one visit, start to finish
- A year’s guarantee on all work
- Technicians who travel to you, UK-wide
- No extra charge for your area
See our prices page.
Our work in Powerstock
Powerstock is about 4 miles north-east of Bridport, in Dorset. We travel to customers in Powerstock and nearby villages, so you don’t need to take anything anywhere. Powerstock is one of 462 places in Dorset we cover.
Our visits in DT6 work the same way as everywhere else we cover. Jobs here include addresses on School Hill and Daws Lane and the roads around them. Nearby, we also work in South Poorton (1 mile north), Clift (2 miles north-east), Askerswell (2 miles south-east), Hooke (3 miles north-east) and Higher Kingcombe (3 miles north-east). Within a short drive, we also cover Weymouth (14 miles south-east), Dorchester (11 miles east), Bridport (4 miles south-west), Sherborne (15 miles north-east), Rodwell (14 miles south-east) and Fordington (12 miles east).
Near you in Powerstock
Locally, our jobs take us to homes close to Three Horseshoes Inn, Parish Church of St Mary and Powerstock Church of England Voluntary Aided Primary School, among other places. Further afield, we also cover the area around Bridport Community Hospital (3.9 miles west) and Beaminster Museum (3.8 miles north-west). The countryside around Powerstock includes Eggardon Hill.
About our accreditations · Every repair comes with a one-year guarantee.
