Derbyshire · England
Non-slip bath & shower coating in Riber, Derbyshire
Clear non-slip coatings for baths and shower trays for homes and businesses in Riber and across Derbyshire. Send pictures for a free, fixed quote.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
When to call us in Riber
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Common reasons people in Riber contact us are:
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Before booking anyone
- A fixed price, and whether VAT is included
- How to look after the finish
- When it can be used again
- How the room is protected while they work
About our non-slip bath coating in Riber
The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Whether it’s bath mats that harbour mould or get forgotten and safety for older or less mobile people, we can help.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Area
- Riber (DE4)
- County
- Derbyshire
- Guarantee
- A year, on every repair
- Price
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a morning or an afternoon in most cases. The room is left tidy and ready to use once it has cured.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, normally overnight.
How to prepare
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job.
Read more
What we can’t put right
Before you book, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
Landlord and trade work in Riber
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We work for landlords, letting agents and housing providers in Riber as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Also near Riber
Other services in Riber
Questions from Riber
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
What happens after I send pictures?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Do you come to Riber?
Yes. We cover the whole UK and come to Riber. Send us pictures for a fixed quote, or call 0345 017 0787.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
About Riber
Riber is about 7 miles north of Belper, in Derbyshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Riber is one of 532 towns and villages in Derbyshire where we work. We work right across the region, from Riber to Manchester (37 miles away).
Jobs in DE4 are booked in the same way as anywhere else. Local streets include Riber Road and Carr Lane, all of which we cover. Close by, we cover Starkholmes (1 mile west), Matlock Bath (1 mile west), Tansley (1 mile north-east), Dethick (1 mile south-east) and Matlock (1 mile north-west). Further out, we also cover Chesterfield (9 miles north-east), Ilkeston (14 miles south-east), Belper (7 miles south), Heanor (11 miles south-east), Dronfield (12 miles north) and Ripley (8 miles south-east).
Around Riber
Around Riber, we work in homes near The White Lion pub, Church of St Giles and Highfields School. Other local landmarks include Heights of Abraham (1.1 miles west) and St Giles Church of England Primary School (0.6 miles north-west). For rail, the closest station is Matlock Bath station, roughly 0.8 miles west. Well-known places in the area include Willersley Castle (1.3 miles south-west) and National Stone Centre (2.7 miles south-west). Green spaces nearby include Alport Height.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- Usually one visit, start to finish
- We come to you, anywhere in the UK
- Nothing taken out or refitted
- No extra charge for your area
Read our pricing.
What affects the price in Riber
You won’t pay by the hour. The price is based on:
- The size and number of damaged areas
- Doing more than one item at once
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- A picture taken from further back
- A coin or ruler next to the damage for scale
- The material, if you know it
- Good light, ideally daylight, without flash glare
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
