Hertfordshire · England

Non-slip bath & shower coating in Ringshall, Hertfordshire

Our repair technicians come to Ringshall for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Ringshall?

Should you replace it?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

What you get with us

  • Same prices wherever you are
  • Most jobs done in one visit
  • Fixed prices from your pictures
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our full price list.

How we handle non-slip bath coating in Ringshall

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, in wet room floors (ask us), resurfaced baths and shower trays.

A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Where
Ringshall (HP4)
Area hub
Hertfordshire
Cover
12 months on all our work
Price
Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Landlords, agents and businesses in Ringshall

If you manage property in Ringshall, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Your questions about non-slip bath coating in Ringshall

What does non-slip bath coating cost?

Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item with your HP4 postcode.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

What happens after I send pictures?

We look at the photos and reply with a fixed price and some dates. If we need another angle, we will ask.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

What information do you need?

Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.

Will the price change on the day?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Should I try a DIY kit first?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Where we work around Ringshall

Ringshall is about 4 miles north of Berkhamsted, in Hertfordshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Ringshall is one of 381 towns and villages in Hertfordshire we cover. We work right across the region, from Ringshall to London (30 miles away).

Our visits in HP4 work the same way as everywhere else we cover. That includes homes on Alderton Drive, Beacon Road and Golf Club Road. You’ll find Ringshall on the B4506, so it’s easy for us to reach. Neighbouring places we cover include Little Gaddesden (1 mile south-east), Hudnall (1 mile south-east), Dagnall (2 miles north), Hudnall Corner (2 miles east) and Studham (2 miles north-east). Within a short drive, we also cover Watford (13 miles south-east), Hemel Hempstead (6 miles south-east), St Albans (11 miles south-east), Harpenden (9 miles east), Hatfield (15 miles east) and Berkhamsted (4 miles south).

Around Ringshall

Ringshall’s nearest station is Tring station, about 2.4 miles south-west. Further afield, we also cover the area around Pitstone Green Museum (3.2 miles west). Open spaces near Ringshall include Sallowsprings and Ivinghoe Beacon.

Map of Ringshall © OpenStreetMap contributors

What we’re called out for in Ringshall

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

It’s worth getting a quote if you see:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people

What to look for in a quote

  • What prep work is covered
  • Whether the price is fixed and includes VAT
  • When it can be used again
  • How changes to the job are handled

How to compare quotes

How we price non-slip bath coating

There’s no charge for travel to Ringshall. The price depends on:

  • How many items we do on one visit
  • How easy the damage is to reach
  • How many areas need work
  • Whether old repairs or coatings need taking off

There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed price

The better the photos, the more accurate the price. Here’s what helps:

  • One picture of the entire bath or shower tray
  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit
  • The material, if you know it

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

When a repair isn’t the answer

We’d rather lose a job than do one that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before you book.

Surfaces we repair

  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays

How the visit works

Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, normally overnight.

Preparing for the visit

  • Mention any parking restrictions or tricky access
  • Mention any earlier repairs or resurfacing
  • Tell us if there are stairs or a lift

Get a quote

Send us a picture of the damage and a wider shot of the entire item, with your HP4 postcode, and we will reply with a fixed quote.

Send pictures for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.