West Sussex · England
Non-Slip Bath Coating in Rusper
Non-slip bath coating across Rusper and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
Non-slip bath coating in Rusper, done in place
The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Whether it’s bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, we can typically put it right.
A one-year guarantee comes as standard, so you are covered after the visit. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Rusper (RH12)
- Region
- West Sussex
- Warranty
- One year on every repair
- Price
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What non-slip bath coating costs
We price every job individually. What matters most is:
- What the surface is made of
- What kind of damage it is
- How many items we do on one visit
- Unusual colours or finishes
The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
How to get a fixed price
We price nearly every job from photos. This is what we need:
- A photo taken from further back
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- Any details about the material
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why us?
- Fixed prices from your pictures
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
Read our pricing.
Rusper and nearby
Rusper is about 4 miles west of Crawley, in West Sussex. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Rusper is one of 371 towns and villages in West Sussex where we work. Our jobs stretch from Rusper to London (27 miles away).
Our visits in RH12 work the same way as everywhere else we cover. Jobs here include addresses on High Street, Cooks Mead and Chalice Walk. Neighbouring places we cover include Lambs Green (1 mile east), Ifieldwood (2 miles east), Russ Hill (3 miles north-east), Bewbush (3 miles south-east) and Cudworth (3 miles north). Within a short drive, we also cover Crawley (4 miles east), Horsham (4 miles south-west), Haywards Heath (12 miles south-east), Burgess Hill (13 miles south-east), East Grinstead (12 miles east) and Broadfield (4 miles south-east).
What’s near Rusper
Locally, our jobs take us to homes close to St Mary Magdalene church and Rusper Primary School, among other places. The closest station to Rusper is Faygate station, roughly 1.8 miles south. A little further out are Crawley Museum (3.9 miles east) and Crawley Hospital (3.6 miles east). Open spaces near Rusper include Vann Lake and Warnham LNR.
Landlord and trade work in Rusper
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Rusper, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Nearby places to Rusper
Also in Rusper
The process
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. It normally takes a morning or an afternoon.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
- Make sure the room can be ventilated
Get a quote
The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
When a repair is not the answer
Before you book, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Enamelled baths
- Resurfaced baths
When to call us in Rusper
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Contact us if you’ve noticed any of these:
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Before you book anyone
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- If travel is included in the price
FAQs for Rusper
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What does non-slip bath coating cost?
We give a fixed price from your pictures. Send a close-up and a picture of the entire item with your RH12 postcode.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Do you work in Rusper?
Yes. We work across the UK and come to Rusper. Send us pictures for a fixed quote, or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
