Nottinghamshire · England
Non-Slip Bath Coating in Selston
Non-slip bath coating across Selston and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
How we handle non-slip bath coating in Selston
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. We work on enamelled baths, acrylic baths and resurfaced baths, and people most frequently call us about a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten.
You get a one-year guarantee, the same in Selston as everywhere else we work. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- Selston (NG16)
- Region
- Nottinghamshire
- Guarantee
- A year, on every repair
- Price
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a few hours. Before we go, we will explain when it can be used and how to look after it.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, normally overnight.
Before we arrive
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
What non-slip bath coating costs
You will not pay by the hour. The price is based on:
- The material and finish
- Previous DIY repairs that have to come out
- How hard the colour is to match
- The size and number of damaged areas
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- One sharp close-up of the damage
To get a price, send a couple of pictures through our quote form or ring us. We’ll say straight away if a repair is the right fix.
When to call us in Selston
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Customers generally contact us about:
- Safety for older or less mobile people
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Before booking anyone
- What happens if the damage is worse than the photos show
- A fixed quote, and whether VAT is included
- How long it needs to cure
- Who will actually do the work
For landlords and businesses
For anyone letting property in or around Selston, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
We carry out planned and one-off repairs for housing associations and facilities teams in Nottinghamshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- One price list for the whole UK
- A year’s guarantee on all work
Take a look at our prices page.
Towns and villages near Selston
What else we do in Selston
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
About Selston
Selston is about 3 miles south-west of Kirkby-in-Ashfield, in Nottinghamshire. Customers in Selston get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Selston is one of 329 towns and villages in Nottinghamshire where we work. You can also see our page for Manchester, about 47 miles away.
Jobs in NG16 are booked in the same way as anywhere else. Whether you live on Station Road, Pennine Drive and Elmtree Avenue or anywhere nearby, a technician can come to you. We also cover the places around Selston: Bagthorpe (1 mile south), Westwood (1 mile south-west), Pinxton (2 miles north-west), Jacksdale (2 miles south-west) and Pye Bridge (2 miles west). Larger places within reach include Mansfield (7 miles north-east), Beeston (11 miles south), Carlton (11 miles south-east), Sutton in Ashfield (4 miles north-east), Hucknall (5 miles south-east) and West Bridgford (13 miles south-east).
Landmarks near Selston
Typical jobs here are in homes near St. Helen's Church, Holly Hill Primary and Nursery School and Selston High School and the streets around them. The closest station to Selston is Kirkby in Ashfield station, roughly 2.7 miles north-east of the centre. Nearby you’ll also find John King Workshop Museum (1.3 miles north-west) and Designer Outlet East Midlands (2.4 miles north).
Your questions about non-slip bath coating in Selston
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What do you need from me?
Photos of the damage, a photo of the whole bath or shower tray and your postcode. Then we will agree a date.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you work in Selston?
Yes. We work across the UK and come to Selston. Send pictures and we’ll quote, or call 0345 017 0787.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What we can’t put right
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
- Enamelled baths
About our accreditations · Every repair comes with a one-year guarantee.
