Kent · England
Non-Slip Bath Coating for Snargate homes
Non-slip bath coating for Snargate, without a refit. Send us pictures for a fixed quote, then book a visit.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
How we price non-slip bath coating
Prices are worked out job by job. The main factors are:
- How much damage there is
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- What the surface is made of
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- Good light, ideally daylight, without flash glare
- Any details about the material
- A wider photo showing the whole bath or shower tray
- The postcode, so we can plan the visit
Email us a photo of the damage and a wider shot of the whole item, with your TN29 postcode, and we will come back with a fixed quote.
About our non-slip bath coating in Snargate
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We regularly repair resurfaced baths, enamelled baths and shower trays, and the jobs we see most are worn-out textured areas and a bath or tray that is slippery when wet.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Snargate (TN29)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need non-slip bath coating in Snargate
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Customers typically contact us about:
- Safety for older or less mobile people
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Comparing quotes
- How soon you can use it again
- Whether they match the colour on site
- What aftercare is recommended
- Whether a trained technician does the job
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- A year’s guarantee on all work
- A fixed quote before you book
- Accredited with CHAS, Constructionline and SafeContractor
- Typically one visit, start to finish
Read our pricing.
What a repair can’t fix
It helps to know what we cannot do too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Where we work around Snargate
Snargate is about 8 miles south of Ashford, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Snargate is one of 922 towns and villages in Kent where we work. Our nearest city page is London, about 52 miles away.
Every address in TN29 is within our area. Jobs here include addresses on Short Lane and Snargate Lane and the roads around them. If you’re just outside Snargate, we cover Brenzett (1 mile south-east), Ivychurch (2 miles east), Kenardington (3 miles north-west), Hamstreet (3 miles north) and Ruckinge (4 miles north-east). Larger places within reach include Ashford (8 miles north), Folkestone (15 miles east), Hythe (11 miles east), Hawkinge (15 miles north-east), Tenterden (7 miles north-west) and Cheriton (14 miles east).
What’s near Snargate
Our clients here include homes close to Red Lion pub and Church of St Dunstan, among other places. Snargate’s nearest station is Appledore (Kent) station, roughly 1.1 miles north-west. A little further out are Brenzett Aeronautical Museum (1.6 miles south-east) and Romney 'castle' (3.4 miles south-east). For a walk, there is Orlestone Forest.
Snargate questions
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Will I see the coating?
Very little: the treated area looks slightly matt.
The process
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. It usually takes a few hours, and you can get on with other things while we’re there.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Make sure the area is dry
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
More services for Snargate
About our accreditations · Every repair comes with a one-year guarantee.
