Lincolnshire · England

Non-Slip Bath Coating for Spanby homes

Non-slip bath coating for Spanby, without a refit. Get a fixed quote from your pictures, then we come to you.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Spanby

What we cannot put right

In fairness, there are a few things a repair will not fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we work on in Spanby

  • Wet room floors (ask us)
  • Resurfaced baths
  • Acrylic baths
  • Enamelled baths
  • Shower trays

Non-slip bath coating in Spanby without replacing anything

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Whether it’s resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, we can help, on acrylic baths, wet room floors (ask us) and enamelled baths alike.

We stand behind the work with a one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Location
Spanby (NG34)
County
Lincolnshire
Cover
A year, on every repair
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

Spanby questions

What information do you need?

Some photos, your postcode and how to reach you. On the day, access to the room.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

What areas do you cover?

All of Lincolnshire, and the rest of the UK. There’s no extra charge for travel.

Do the materials smell?

It depends on the job, but often a little. Ventilation keeps it to a minimum.

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

Can you redo someone else’s repair?

Most of the time. Let us know what was used before and we’ll plan for it.

Is there a guarantee?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. The price reflects the work involved, not your postcode. You’ll see the full price before booking.

Why book with us

  • Most jobs done in one visit
  • No need to remove anything
  • Accredited with CHAS, Constructionline and SafeContractor
  • A fixed quote before booking

Read our prices page.

How we price non-slip bath coating

We give every job a fixed price from pictures. These are the things that affect it:

  • Whether we combine several jobs
  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • The material and finish

We charge the same wherever you are, with no extra for Spanby. The job itself decides the price: how much damage, what it’s made of and how many items.

Send photos for a quote

Almost every job we do is priced from pictures. This is what we need:

  • One sharp close-up of the damage
  • A coin or ruler next to the damage for scale
  • Natural light rather than flash
  • A wider photo showing the whole bath or shower tray

For a price in Spanby, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

What we do, step by step

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes a morning or an afternoon. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, normally overnight.

Getting ready for the visit

  • Open a window if you can
  • Clear toiletries, mats and anything else from around the area
  • Tell us about parking, stairs or access

Ask for a price

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a fixed price

Related advice

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Landlords, agents and businesses in Spanby

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

What we are called out for in Spanby

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

These are the problems we are asked about most:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet

Before you book anyone

  • Who turns up on the day
  • How the colour is matched
  • How long the guarantee is and what it covers
  • How changes to the job are handled

Choosing a repair company

Covering Spanby

Spanby is about 5 miles south of Sleaford, in Lincolnshire. Jobs in Spanby are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Spanby is one of 732 places in Lincolnshire we cover. Our nearest city page is Birmingham, about 71 miles away.

Postcode districts we cover here: NG34. If you are just outside Spanby, we cover Threekingham (1 mile south), Scredington (2 miles north), Swaton (3 miles east), Horbling (3 miles south-east) and Burton Pedwardine (3 miles north-east). Larger places within reach include Boston (15 miles east), Grantham (11 miles west), Spalding (13 miles south-east), Sleaford (5 miles north), Bourne (11 miles south) and Austerby (11 miles south).

Around Spanby

Spanby’s nearest station is Sleaford station, roughly 4.7 miles north of the centre. Other landmarks nearby include Folkingham Castle (3 miles south) and Rauceby Hospital (4.8 miles north-west).

Map of Spanby © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.