Perth and Kinross · Scotland

Non-Slip Bath Coating for St Fillans homes

Clear non-slip coatings for baths and shower trays in St Fillans, carried out at your home and guaranteed for a year.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in St Fillans

Non-slip bath coating in St Fillans, done in place

It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Our technicians work on resurfaced baths, shower trays and enamelled baths, and common reasons people get in touch are resurfaced baths that are now too smooth and worn-out textured areas.

Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
St Fillans (PH6)
County
Perth and Kinross
Guarantee
One year on every repair
Price
Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What we do, step by step

Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, normally overnight.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Mention any earlier repairs or resurfacing
  • Keep a parking space free if you can

How to get a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Advice

What we are called out for in St Fillans

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

You may need us if you’ve spotted:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas

What to look for in a quote

  • How long the guarantee is and what it covers
  • Aftercare advice
  • Who will actually do the work
  • Whether the colour is mixed to match

10 questions to ask before booking

Prices and what affects them

We price every job individually. What matters most is:

  • The type of damage
  • Where the damage is and how we get to it
  • Any earlier repairs that need removing first
  • How much damage there is

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your photos

You can take the photos on your phone, there’s no need for anything special. Ensure they show:

  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • A close-up of the damage, in focus
  • Natural light rather than flash

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.

Questions from St Fillans

What do you need from me?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Do you work in St Fillans?

We do. Technicians travel to St Fillans from across the region, and the price is the same as everywhere else.

Can you repair something that is been repaired before?

Most of the time. Tell us what was done before.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Will I see the coating?

Very little: it shows as a matt area where you stand.

Is there any odour?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Repair or replace in St Fillans?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.

Why us?

  • Repair technicians who travel to you, UK-wide
  • Rooms protected and left tidy
  • CHAS and Constructionline accredited
  • Generally one visit, start to finish

See our full price list.

Where we work around St Fillans

St Fillans is about 20 miles north of Stirling, in Perth and Kinross. Anywhere in PH6, a technician comes to you. St Fillans is one of 107 places in Perth and Kinross we cover. Our nearest city page is Glasgow, about 38 miles away.

Here we cover the PH6 postcode area. We regularly work on streets such as Dundurn Walk and Manse Lane and the roads around them. Other places close to St Fillans include Comrie (5 miles east), Lochearnhead (7 miles west), Killin (9 miles north-west), Strathyre (10 miles south-west) and Callander (11 miles south).

Around St Fillans

Typical jobs here are in homes near Church Of The Holy Spirit. The countryside around St Fillans includes Creag Odhar and Loch Boltachan.

Map of St Fillans © OpenStreetMap contributors

DIY kit or professional repair?

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

When we would advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly.

What we work on

  • Shower trays
  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths

Landlords, agents and businesses in St Fillans

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.