Suffolk · England

Non-slip bath & shower coating in Stanton, Suffolk

Non-slip bath coating in Stanton without the cost of replacing. Get a fixed price from your pictures, then we come to you.

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Stanton

Stanton and the surrounding area

Stanton is about 8 miles south-east of Thetford, in Suffolk. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our repair technicians cover 731 places across Suffolk, from the larger towns to small villages. We work right across the region, from Stanton to London (71 miles away).

Jobs in IP31 work the same way as everywhere else we cover. Whether you live on The Street, Lofft Close and The Chase or a nearby road, a technician can come to you. Neighbouring places we cover include Stanton Chare (1 mile north-west), Bardwell (1 mile west), Barningham (2 miles north), Ixworth (3 miles south-west) and Coney Weston (3 miles north). Further out, we also cover Bury St Edmunds (9 miles south-west), Stowmarket (11 miles south-east), Diss (10 miles east), Brandon (14 miles north-west), Needham Market (14 miles south-east) and Chilton (10 miles south-east).

Landmarks near Stanton

Locally, our jobs take us to homes close to Church of All Saints, Stanton Community Primary School and Ixworth Free School and the streets around them. Further afield, we also cover the area around Pakenham Water Mill (3.1 miles south-west) and Fakenham Magna (3.6 miles north-west). Not far away are Mickle Mere.

Map of Stanton © OpenStreetMap contributors

Non-slip bath coating in Stanton, done in place

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. If you are dealing with resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, we can generally put it right.

Every job is backed for twelve months. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Where
Stanton (IP31)
County
Suffolk
Warranty
12 months on all our work
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

Common problems we fix in Stanton

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Common reasons people in Stanton contact us are:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

What your quote should include

  • A fixed price, and whether VAT is included
  • If travel is included in the price
  • Whether a trained technician does the job
  • How changes to the job are handled

10 questions to ask before booking

For landlords and businesses

Landlords, letting agents and housing providers in Stanton use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

If you manage property in Stanton, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.

What non-slip bath coating costs

Prices are worked out job by job, from your photos. What matters most is:

  • Doing more than one item at once
  • How many areas need work
  • Previous DIY repairs that have to come out
  • Access to the area

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

How to get a fixed price

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • A coin beside the damage so we can judge size
  • Natural light rather than flash
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.

How it works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Tell us about any previous repairs or coatings
  • Have somewhere for us to park nearby if possible

Get a quote

Most customers in Stanton get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed price

Related advice

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly.

Materials we repair

  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Wet room floors (ask us)

DIY repairs versus a professional job

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Questions from Stanton

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.

Is my repair covered?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

What if the damage is worse than the pictures show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

I’m a tenant. Can you help?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Can you do more than one item on the same visit?

Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.

Why choose Surface Doctor in Stanton

  • We will tell you if it’s not worth repairing
  • Most jobs done in one visit
  • CHAS and Constructionline accredited
  • No extra charge for your area

See our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.