Rutland · England
Non-slip bath & shower coating in Stockerston, Rutland
Clear non-slip coatings for baths and shower trays for homes and businesses in Stockerston and across Rutland. Free, fixed quotes from your photos.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Non-slip bath coating in Stockerston, done in place
It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. Common call-outs are for a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, across shower trays, enamelled baths and resurfaced baths.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Stockerston (LE15)
- Region
- Rutland
- Cover
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
About Stockerston
Stockerston is about 6 miles north-west of Corby, in Rutland. Anywhere in LE15, a technician comes to you. We cover 47 places across Rutland. Our nearest city page is Birmingham, about 48 miles away.
Our visits in LE15 are booked in the same way as anywhere else. From Uppingham Road and Church Lane or a nearby road, we can come to you. If you’re just outside Stockerston, we cover Wardley (1 mile north), Allexton (2 miles north-west), Uppingham (2 miles north-east), Lyddington (2 miles east) and Great Easton (3 miles south). Further out, we also cover Oakham (7 miles north), Barleythorpe (8 miles north), Cottesmore (11 miles north-east), Langham (8 miles north), North Luffenham (7 miles north-east) and Whissendine (10 miles north).
Local landmarks in Stockerston
In Stockerston, that means homes near Church of St Peter and Uppingham Community College, among other places. A little further out are Rockingham Castle (4.5 miles south-east) and Hallaton Museum (3.3 miles west). For a walk, there’s Great Merrible Wood and King's Hill.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Why repair rather than replace?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- One visit for most repairs
- Rooms protected and left tidy
- No extra charge for your area
- Straight answers about what a repair can do
See our prices page.
Also near Stockerston
What else we do in Stockerston
When a repair isn’t the answer
Some jobs aren’t right for a repair, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Resurfaced baths
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Enamelled baths
When to call us in Stockerston
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Comparing quotes
- How the colour is matched
- What happens if they find more damage
- What aftercare is recommended
- What preparation is included
Stockerston questions
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What areas do you cover?
We cover the entire UK, including Stockerston and the rest of Rutland. Send your postcode with your photos and we’ll confirm dates.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you cover Stockerston?
Yes. We work across the UK and come to Stockerston. Send us photos for a fixed quote, or call 0345 017 0787.
Prices and what affects them
Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- Where the damage is and how we get to it
- What kind of damage it is
- The size and number of damaged areas
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- Something in shot to show the size
- The material, if you know it
- Where you are, by postcode
- Any earlier repairs or coatings
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, typically overnight.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
