Lincolnshire · England

Non-Slip Bath Coating in Swallow

Non-slip bath coating in Swallow without the cost of replacing. Get a fixed price from your pictures, then we come to you.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Swallow

About our non-slip bath coating in Swallow

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. We regularly repair enamelled baths, shower trays and acrylic baths, and the jobs we see most are resurfaced baths that are now too smooth and worn-out textured areas.

You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Where
Swallow (LN7)
Region
Lincolnshire
Cover
One year on every repair
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What non-slip bath coating costs

Each job gets its own fixed price. These are the things that affect it:

  • Any earlier repairs that need removing first
  • The material and finish
  • Where the damage is and how we get to it
  • The type of damage

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

How to get a fixed quote

A couple of clear pictures is all it takes. It helps if you send:

  • One picture of the whole bath or shower tray
  • Daylight if possible, and no flash reflection
  • Whether it’s been repaired or coated before
  • Where you are, by postcode

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

Where we work around Swallow

Swallow is about 6 miles south-west of Grimsby, in Lincolnshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Our technicians cover all 732 towns and villages across Lincolnshire. You can also see our page for Leeds, about 58 miles away.

All of LN7 is within our area, from the main roads to the quietest streets. Local streets include Cuxwold Road, Chapel Lane and Beelsby Road. If you’re just outside Swallow, we cover Irby upon Humber (2 miles north-east), Cabourne (2 miles west), Rothwell (3 miles south-west), Riby (3 miles north) and Laceby (3 miles north-east). Larger places within reach include Louth (14 miles south-east), New Waltham (7 miles east), Humberston (8 miles east), Market Rasen (10 miles south-west), Kirton in Lindsey (15 miles west) and Caistor (4 miles west).

What’s near Swallow

Our customers here include homes close to Church of Holy Trinity and the streets around them. Nearby you’ll also find Caistor Castle Hill (4 miles west) and Diana (5.9 miles north-east).

Map of Swallow © OpenStreetMap contributors

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

What you get with us

  • Everything repaired in place
  • Usually one visit, start to finish
  • We come to you, anywhere in the UK
  • Dust sheets down, tidy finish

Take a look at our full price list.

Common problems we fix in Swallow

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Common reasons people in Swallow contact us are:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

What to look for in a quote

  • Who turns up on the day
  • The length of the guarantee and what it covers
  • How to care for the finish
  • A fixed quote, and whether VAT is included

How to compare quotes

How it works

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a morning or an afternoon. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, normally overnight.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Point us to the nearest place to park
  • Tell us about parking, stairs or access

Get a quote

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Advice

When we would advise against a repair

We would rather lose a job than do one that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Materials we work on in Swallow

  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths
  • Enamelled baths

Your questions about non-slip bath coating in Swallow

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and we will quote them together.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Can I get a quote without a visit?

Nearly always. If photos do not show enough, we will ask for another angle.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Are there extra charges for Swallow?

There’s no separate call-out charge. The fixed price covers the visit and the work.

Is there a guarantee?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum.

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.

We are used to working with agents and managing companies. Just send pictures, the address and how to get access.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.