Herefordshire · England
Non-slip bath & shower coating in Tillington Common, Herefordshire
We travel to Tillington Common for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.
- We clean and degrease the standing area.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, typically overnight.
Before we arrive
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
- Point us to the nearest place to park
Get a quote
For a price in Tillington Common, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
How we handle non-slip bath coating in Tillington Common
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Our repair technicians work on enamelled baths, shower trays and resurfaced baths, and common reasons people contact us are a bath or tray that is slippery when wet and safety for older or less mobile people.
We guarantee the work for a year. If something is not right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Tillington Common (HR4)
- Area hub
- Herefordshire
- Warranty
- One year on every repair
- Quote
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Tillington Common
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Where we work around Tillington Common
Tillington Common is about 5 miles north-west of Hereford, in Herefordshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Tillington Common is one of 255 towns and villages in Herefordshire we cover. We work right across the region, from Tillington Common to Birmingham (45 miles away).
Our visits in HR4 are booked in the same way as anywhere else. If you’re just outside Tillington Common, we cover Tillington (1 mile south-east), Canon Pyon (2 miles north), Portway (2 miles south-east), Auberrow (2 miles east) and Wellington (2 miles north-east). We also work in nearby towns such as Hereford (5 miles south-east), Leominster (8 miles north), Redhill (6 miles south-east), Newton Farm (6 miles south-east), Whitecross (4 miles south-east) and Eign Hill (6 miles south-east).
Around Tillington Common
We visit homes around Burghill Community Academy. The closest station to Tillington Common is Hereford station, about 4.9 miles south-east. A little further out are St. Mary's Hospital (2.3 miles south-east) and Butthouse Motte (2 miles north-west). Not far away are Merryhill and Wyevale Wood.
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- No need to remove anything
- Free fixed quotes from pictures
- Generally one visit, start to finish
- CHAS and Constructionline accredited
See our full price list.
Common questions in Tillington Common
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Tillington Common.
Can you quote from pictures?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
How much does non-slip bath coating cost in Tillington Common?
The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Also near Tillington Common
Other services in Tillington Common
When we’d advise against a repair
In fairness, there are a few things a repair will not fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Enamelled baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
- Resurfaced baths
When to call us in Tillington Common
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
If you can see any of these, send us a picture:
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
Comparing quotes
- How long the guarantee is and what it covers
- Who will actually do the work
- Whether they match the colour on site
- How soon you can use it again
What non-slip bath coating costs
There are no hourly rates or hidden extras. The price depends on:
- Doing more than one item at once
- What the surface is made of
- How easy the damage is to reach
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your photos
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Where you are, by postcode
- A wider photo showing the entire bath or shower tray
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
