Powys · Wales

Non-slip bath & shower coating in Tre-Derwen, Powys

Our technicians come to Tre-Derwen for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Tre-Derwen

Non-slip bath coating in Tre-Derwen, done in place

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. We work on resurfaced baths, acrylic baths and shower trays, and people most frequently call us about safety for older or less mobile people and a bath or tray that is slippery when wet.

All our work comes with a one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Location
Tre-Derwen (SY22)
Region
Powys
Warranty
12 months on all our work
Quote
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Tre-Derwen questions

How quickly can you book me in?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

What areas do you cover?

Across the UK, and that includes Tre-Derwen. Prices don’t change with location.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

Is there a call-out fee?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

What does non-slip bath coating cost?

The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Can I fix it myself?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

What happens on the day

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we are done and tell you when it’s ready to use.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Tell us about any previous repairs or coatings
  • Keep children and pets away from the room on the day

Ask for a price

For a price in Tre-Derwen, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Read more

How we price non-slip bath coating

There are no hourly rates or hidden extras. The price depends on:

  • The material
  • Access to the area
  • The size and number of damaged areas
  • How hard the colour is to match

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

Getting a price from photos

Good photos mean an accurate price. Here’s what helps:

  • One sharp close-up of the damage
  • A wider photo showing the entire bath or shower tray
  • A coin beside the damage so we can judge size
  • Any earlier repairs or coatings

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Work for landlords and builders

We work for landlords, letting agents and housing providers in Tre-Derwen as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why Tre-Derwen clients choose us

  • Rooms protected and left tidy
  • Honest advice, even when it means no job
  • No extra charge for your area
  • Typically one visit, start to finish

Take a look at our prices page.

Covering Tre-Derwen

Tre-Derwen is about 7 miles south-west of Oswestry, in Powys. We visit homes and businesses in Tre-Derwen and nearby villages, so nothing has to leave your home. Tre-Derwen is one of 234 places in Powys where we work. We work right across the region, from Tre-Derwen to Liverpool (45 miles away).

Postcode districts we cover here: SY22. We also cover the places around Tre-Derwen: Waen (1 mile west), Carreghofa (1 mile north-east), Llansantffraid-ym-Mechain (1 mile north-west), Llansantffraid (1 mile west) and Winllan (2 miles north-west). Within a short drive, we also cover Y Trallwng (7 miles south), Bron-y-Buckley (7 miles south), Cegidfa (5 miles south), Montgomery (14 miles south), Llanfair Caereinion (12 miles south-west) and Llanfyllin (6 miles west).

Landmarks near Tre-Derwen

Locally, our jobs take us to homes close to Llansantffraid C.I.W.A. School and Gwern-y-Pant Chapel. Well-known places in the area include Plas yn Dinas (1.4 miles west). Not far away are Pen Tre-derwen.

Map of Tre-Derwen © OpenStreetMap contributors

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Tre-Derwen

  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths

When to call us in Tre-Derwen

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Send us a photo if you notice any of these:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people

What your quote should include

  • How to care for the finish
  • Whether the price is fixed and includes VAT
  • What the guarantee covers, and for how long
  • Whether the colour is mixed to match

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.