Suffolk · England
Non-Slip Bath Coating for Walberswick homes
Fixed-price non-slip bath coating in Walberswick and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
What we cannot put right
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
Non-slip bath coating in Walberswick, done in place
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Whether it’s bath mats that harbour mould or get forgotten and worn-out textured areas, we can help, on enamelled baths, resurfaced baths and shower trays alike.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Where
- Walberswick (IP18)
- Area hub
- Suffolk
- Cover
- A year, on every repair
- Quotes
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Walberswick: your questions answered
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you quote from photos?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
How do I get a price for non-slip bath coating in Walberswick?
We give a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Work for landlords and builders
For anyone letting property in or around Walberswick, we’ll quote for several properties at once. Send photos for each one and we will price them together.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Walberswick and the surrounding area
Walberswick is about 11 miles south of Lowestoft, in Suffolk. Across the IP18 area, we come to you. We work in 731 places in Suffolk, from the larger towns to small villages.
Here we cover the IP18 postcode area. Whether you live on The Street, Palmer's Lane and Church Field or anywhere nearby, we can come to you. Neighbouring places we cover include Southwold (1 mile north-east), Reydon (2 miles north), Reydon Smear (2 miles north), Easton Bavents (2 miles north-east) and Wangford (3 miles north-west). Within a short drive, we also cover Lowestoft (11 miles north), Beccles (10 miles north), Bungay (13 miles north-west), Halesworth (7 miles west), Leiston (8 miles south-west) and Carlton Colville (10 miles north).
Around Walberswick
We visit homes around The Anchor pub and St Andrew's Church. Further afield, we also cover the area around Alfred Corry Lifeboat Museum (0.8 miles east). Green spaces nearby include Hen Reedbeds.
What affects the price in Walberswick
Each job gets its own fixed price. These are the things that affect it:
- The type of damage
- The material and finish
- The size and number of damaged areas
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Quotes from your photos
Photographing the damage takes a minute. Please include:
- A wider photo showing the whole bath or shower tray
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a few hours, including clearing up.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, typically overnight.
Before we arrive
- Make sure the room can be ventilated
- Make sure the area is dry
- Plan for the room to be out of bounds to pets and children
How to get a price
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Advice
Signs you need non-slip bath coating in Walberswick
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
If you can see any of these, send us a photo:
- Safety for older or less mobile people
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Questions to ask before booking
- How the room is protected while they work
- Aftercare advice
- How soon you can use it again
- Whether the colour is mixed to match
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- One price list for the entire UK
- One-year guarantee on every repair
- Nothing taken out or refitted
- CHAS and Constructionline accredited
Read our full price list.
Towns and villages near Walberswick
What else we do in Walberswick
About our accreditations · Every repair comes with a one-year guarantee.
