Kent · England
Non-Slip Bath Coating for Warmlake homes
Non-slip bath coating in Warmlake without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Non-slip bath coating in Warmlake without replacing anything
The coating is clear and textured, so the bath looks much the same. It suits older people, families and holiday lets. Typical jobs include a bath or tray that is slippery when wet and worn-out textured areas, across shower trays, wet room floors (ask us) and enamelled baths.
A one-year guarantee comes as standard, so you are not left on your own once we have gone. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Warmlake (ME17)
- County
- Kent
- Warranty
- One year on every repair
- Quotes
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- We leave it to cure, normally overnight.
How to prepare
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
How to get a price
For a price in Warmlake, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Warmlake and the surrounding area
Warmlake is about 4 miles south-east of Maidstone, in Kent. From the centre of Warmlake to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Warmlake is one of 922 towns and villages in Kent where we work. Our jobs stretch from Warmlake to London (35 miles away).
Jobs in ME17 work the same way as everywhere else we cover. Whether you live on Warmlake Orchard, Oast Gardens and Maidstone Road or anywhere nearby, a technician can come to you. We also cover the places around Warmlake: Five Wents (1 mile north), Sutton Valence (1 mile south), Langley Heath (1 mile north), Langley (1 mile north) and Chart Sutton (1 mile west). We also work in nearby towns such as Maidstone (4 miles north-west), Ashford (13 miles south-east), Sittingbourne (10 miles north-east), Royal Tunbridge Wells (15 miles south-west), Tonbridge (14 miles west) and Faversham (14 miles north-east).
What’s near Warmlake
In Warmlake, that means homes near The Plough Inn, Church of St Michael and Sutton Valence Primary School, among other places. The closest station to Warmlake is Hollingbourne station, roughly 3.3 miles north-east. Well-known places in the area include KIMS hospital (4.6 miles north) and The Dog Collar Museum (2.3 miles north-east).
What non-slip bath coating costs
You won’t pay by the hour. The price depends on:
- The type of damage
- The material
- How many areas need work
- Where the damage is and how we get to it
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Quotes from your pictures
You can normally get a fixed quote without us visiting. To make it quick:
- Where you are, by postcode
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- A photo taken from further back
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We work for landlords, letting agents and housing providers in Warmlake as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
What we can’t put right
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
- Acrylic baths
- Enamelled baths
Should you replace it?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Warmlake
- One visit for most repairs
- Fixed prices from your photos
- No extra charge for your area
- Nothing taken out or refitted
See our pricing.
Your questions about non-slip bath coating in Warmlake
Which areas do you work in?
The whole UK, including all of Kent. Send your postcode with your photos and we’ll confirm dates.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you work in Warmlake?
We do. We send a technician to Warmlake for every job, with no extra charge for travel.
Will the price change on the day?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Places near Warmlake
What else we do in Warmlake
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Do you need non-slip bath coating in Warmlake?
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
People typically call us after spotting one of these:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
What to look for in a quote
- Whether the price covers travel
- How to care for the finish
- How changes to the job are handled
- A fixed price, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.
