Norfolk · England

Non-slip bath & shower coating in West Acre, Norfolk

Non-slip bath coating in West Acre without the cost of replacing. Send us pictures for a fixed price, then book a visit.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in West Acre

When a repair is not the answer

Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think.

What we work on

  • Wet room floors (ask us)
  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Acrylic baths

How we handle non-slip bath coating in West Acre

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Our repair technicians work on acrylic baths, wet room floors (ask us) and resurfaced baths, and common reasons people get in touch are worn-out textured areas and safety for older or less mobile people.

A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
West Acre (PE32)
Region
Norfolk
Cover
12 months on all our work
Price
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

What we do, step by step

On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take a few hours, tidy-up included.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Keep a parking space free if you can
  • Ensure the room can be ventilated
  • Tell us about any previous repairs or coatings

Ask for a price

There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Send photos for a quote

Advice

What we’re called out for in West Acre

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Common reasons people in West Acre contact us include:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Worn-out textured areas

Before booking anyone

  • How long it needs to cure
  • Who turns up on the day
  • The length of the guarantee and what it covers
  • How changes to the job are handled

Our hiring checklist

For landlords and businesses

We work for landlords, letting agents and housing providers in West Acre as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Where we work around West Acre

West Acre is about 10 miles east of King's Lynn, in Norfolk. Across the PE32 area, we come to you. We work in 797 places in Norfolk.

Our visits in PE32 work the same way as everywhere else we cover. Streets in the area include Church Green, Sandy Lane and River Road, and we cover them all. Other places close to West Acre include South Acre (2 miles east), East Walton (2 miles west), Castle Acre (2 miles east), Narborough (3 miles south-west) and Fiddler's Green (3 miles east). Larger places within reach include King's Lynn (10 miles west), Dereham (13 miles east), Downham Market (13 miles south-west), Watton (13 miles south-east), Swaffham (5 miles south-east) and Fakenham (13 miles north-east).

Local landmarks in West Acre

Typical jobs here are in homes near Church of All Saints. Nearby you’ll also find Castle Acre Town Defences (2.4 miles east).

Map of West Acre © OpenStreetMap contributors

West Acre questions

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

What areas do you cover?

We work UK-wide. Our prices are the same everywhere.

Can I get a quote without a visit?

In nearly every case. If photos do not show enough, we will ask for another angle.

What does non-slip bath coating cost?

Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your PE32 postcode.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

Do the materials smell?

Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.

Are there extra charges for West Acre?

Travel is included in the price, and we charge the same wherever you are.

Do you come to West Acre?

Yes. We work across the UK and travel to West Acre and the rest of Norfolk. Send us pictures for a fixed quote, or call 0345 017 0787.

Repair or replace in West Acre?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.

What you get with us

  • One price list for the entire UK
  • Everything repaired in place
  • Every repair guaranteed for a year
  • Generally one visit, start to finish

See our pricing.

Can I fix it myself?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

What non-slip bath coating costs

You’ll know the full cost before booking. We take into account:

  • The material and finish
  • The size and number of damaged areas
  • Unusual colours or finishes
  • Where the damage is and how we get to it

Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.

How to get a fixed price

Almost every job we do is priced from pictures. This is what to send:

  • Any details about the material
  • Your postcode, so we can check dates
  • A picture taken from further back
  • A clear, close picture of the problem area

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed quote the same day in most cases.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.