Hampshire · England

Non-slip bath & shower coating in Wickham, Hampshire

Non-slip bath coating across Wickham and nearby, done in a single visit in most cases and guaranteed for a year.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Wickham?

Non-slip bath coating in Wickham without replacing anything

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We work on resurfaced baths, shower trays and enamelled baths, and common reasons people contact us are safety for older or less mobile people and bath mats that harbour mould or get forgotten.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
Wickham (PO17)
Area hub
Hampshire
Warranty
One year on every repair
Price
Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

Why book with us

  • A fixed quote before booking
  • Nothing taken out or refitted
  • A year’s guarantee on all work
  • No extra charge for your area

Take a look at our prices page.

Our work in Wickham

Wickham is about 3 miles north of Fareham, in Hampshire. Jobs in Wickham are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Wickham is one of 683 towns and villages in Hampshire where we work. Our jobs stretch from Wickham to London (63 miles away).

Our visits in PO17 are booked in the same way as anywhere else. Jobs here include addresses on The Square, Station Road and Bridge Street and the roads around them. Being close to the A32 and A334, Wickham is easy for our repair technicians to reach. Other places close to Wickham include Shedfield (1 mile north-west), Shirrell Heath (2 miles north), Kingsmead (2 miles north-east), Woodend (2 miles north-east) and Mislingford (2 miles north). Larger places within reach include Winchester (12 miles north-west), Gosport (7 miles south), Havant (9 miles east), Eastleigh (8 miles north-west), Fareham (3 miles south) and Horndean (8 miles east).

What’s near Wickham

Our customers here include homes close to Church of St Nicholas, Wickham Church of England Primary School and The Old House Hotel, among other places. The nearest railway station is Fareham station, about 3.2 miles south of the centre. Further afield, we also cover the area around Fareham Shopping Centre (3.2 miles south) and Carron Row Farm Museum (3.5 miles south-west). Green spaces nearby include St Clair's Meadow and Portsdown Hill.

Map of Wickham © OpenStreetMap contributors

Do you need non-slip bath coating in Wickham?

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Send us a photo if you notice any of these:

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Questions to ask before you book

  • A fixed price, and whether VAT is included
  • What aftercare is recommended
  • What protection goes down before work starts
  • Whether the colour is mixed to match

Choosing a repair company

The process

We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a morning or an afternoon for most jobs. We leave the room clean and you will know when it can be used.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Open a window if you can
  • Keep pets and children out of the room while we work

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.

Get a free quote

Advice

How we price non-slip bath coating

Quotes are free and the price is fixed. What we take into account:

  • The material
  • How much damage there is
  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

How to get a fixed price

You can usually get a fixed price without us visiting. To make it quick:

  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • A coin or ruler next to the damage for scale
  • Where you are, by postcode

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

What we cannot put right

We’d rather lose a job than do one that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

Work for landlords and builders

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Questions from Wickham

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Are there extra charges for Wickham?

There is no separate call-out charge. Your fixed quote includes everything.

Will a non-slip coating change how my bath looks?

Only slightly: the treated area looks slightly matt.

I rent my home. Can I book you?

We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What happens after I send pictures?

You will get a fixed quote back. You’re under no obligation.

What do you need from me?

Some pictures, your postcode and how to reach you. On the day, access to the room.

How much does non-slip bath coating cost in Wickham?

The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.