Somerset · England
Non-slip bath & shower coating in Wilton, Somerset
Our repair technicians come to Wilton for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Our work in Wilton
Wilton is about 1 mile south-west of Taunton, in Somerset. Jobs in Wilton are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover 640 places across Somerset.
Jobs in TA1 work the same way as everywhere else we cover. Whether you live on Mill Lane, Manor Road and Trull Road or anywhere nearby, a technician can come to you. Wilton is on the A38 and A3807, so it’s easy for us to reach. We also cover the places around Wilton: Taunton (1 mile north-east), Comeytrowe (1 mile west), Bishop's Hull (1 mile west), Upcott (2 miles west) and Staplegrove (2 miles north). We also work in nearby towns such as Bridgwater (9 miles north-east), Chard (11 miles south-east), Wellington (6 miles west), Sydenham (10 miles north-east), Ilminster (10 miles south-east) and Watchet (15 miles north-west).
Landmarks near Wilton
Typical jobs here are in homes near Parkfield Primary School, Vivary Park and The Vivary Arms, among other places. Other local landmarks include St George's Church (less than half a mile east), The Castle School (0.7 miles north-west) and The Castle School (0.7 miles north-west). The nearest railway station is Taunton station, roughly 1 mile north of the centre. Nearby you’ll also find Musgrove Park Hospital (0.6 miles west) and Post Office Telecommunications Museum (within half a mile north-east). For a walk, there is Knowle Hill.
Non-slip bath coating in Wilton without replacing anything
It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. If you are dealing with safety for older or less mobile people and resurfaced baths that are now too smooth, we can normally put it right, on resurfaced baths, enamelled baths and acrylic baths alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Wilton (TA1)
- Area hub
- Somerset
- Warranty
- A year, on every repair
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Places near Wilton
What else we do in Wilton
Common problems we fix in Wilton
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
You may need us if you’ve spotted:
- Worn-out textured areas
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Questions to ask before booking
- How long it needs to cure
- Whether a trained technician does the job
- How the colour is matched
- If travel is included in the price
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before booking
- Work done at your home or business
Take a look at our prices page.
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for a few hours from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- We leave it to cure, usually overnight.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Make sure the room can be ventilated
- Let us know which floor the room is on
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Advice
Honest limits
Before you book, it’s worth knowing the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Shower trays
- Wet room floors (ask us)
What non-slip bath coating costs
We charge the same across the UK, including Wilton. The price reflects:
- How many items we do on one visit
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send pictures for a quote
You can generally get a fixed price without us visiting. To help us price it:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- Any details about the material
- Natural light rather than flash
For a price in Wilton, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Questions from Wilton
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
What areas do you cover?
The whole UK, including all of Somerset. Send your postcode with your pictures and we’ll confirm dates.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
What happens after I send pictures?
We review the photos and send a fixed quote with dates.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
