Devon · England

Non-Slip Bath Coating in Wolborough

Non-slip bath coating across Wolborough and nearby, done in a single visit in most cases and guaranteed for a year.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Wolborough homes

Common questions in Wolborough

What information do you need?

Some photos, your postcode and how to reach you. On the day, access to the room.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

What happens after I send photos?

We come back with a fixed quote. You are under no obligation.

How do I get a price for non-slip bath coating in Wolborough?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Can you do more than one item on the same visit?

Of course, and it typically saves money. Just add the extra items to your photos and you will get one combined price.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Non-slip bath coating in Wolborough without replacing anything

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Our repair technicians work on wet room floors (ask us), shower trays and resurfaced baths, and common reasons people get in touch are safety for older or less mobile people and resurfaced baths that are now too smooth.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Where
Wolborough (TQ12)
Area hub
Devon
Cover
One year on every repair
Quotes
Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.

Wolborough and the surrounding area

Wolborough is about 1 mile south-west of Newton Abbot, in Devon. Anywhere in TQ12, a technician comes to you. Wolborough is one of 586 places in Devon where we work.

Our visits in TQ12 work the same way as everywhere else we cover. Whether you live on Hill Road, Coach Road and South Road or a nearby road, we can come to you. Neighbouring places we cover include Newton Abbot (1 mile north-east), Highweek (1 mile north-west), East Ogwell (1 mile west), Abbotskerswell (1 mile south) and Two Mile Oak Cross (2 miles south). Larger places within reach include Exeter (14 miles north), Exmouth (12 miles north-east), Teignmouth (5 miles east), Dawlish (8 miles north-east), St Thomas (14 miles north) and Larkbeare (14 miles north).

What’s near Wolborough

Around Wolborough, we work in homes near Courtenay Park, South Devon UTC and Parish Church of St Mary the Virgin. You’ll also find Highweek Community Primary and Nursery School (under half a mile north), Newton Abbot College (0.6 miles north), Passmore Edwards Centre (less than half a mile north-east) and Kennedys pub (within half a mile north-east). The nearest railway station is Newton Abbot station, about 0.8 miles north-east of the centre. Nearby you will also find Cary Castle (4.8 miles south-east) and Old Newton Abbot Hospital (0.5 miles north-east). Open spaces near Wolborough include Orley Common.

Map of Wolborough © OpenStreetMap contributors

What non-slip bath coating costs

You’ll know the full cost before booking. We take into account:

  • What kind of damage it is
  • Previous DIY repairs that have to come out
  • The size and number of damaged areas
  • Access to the area

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Phone photos are fine, there’s no need for anything special. Just ensure we can see:

  • A clear, close picture of the problem area
  • A coin beside the damage so we can judge size
  • What it’s made of, if you know
  • A picture taken from further back

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

The process

We agree an arrival time beforehand. Once we’re there, the work takes a few hours. The room is left tidy.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, normally overnight.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Mention if the room is upstairs or in a flat
  • Keep a parking space free if you can

Get a quote

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed quote

Read more

What we cannot put right

A repair is not right for every job, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Materials we repair

  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths

Do you need non-slip bath coating in Wolborough?

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Keep an eye out for these signs:

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Before booking anyone

  • A fixed quote, and whether VAT is included
  • Whether they match the colour on site
  • How long it needs to cure
  • The length of the guarantee and what it covers

10 questions to ask before you book

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Dust sheets down, tidy finish
  • One price list for the whole UK
  • Everything repaired in place
  • Every repair guaranteed for a year

See our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.