Surrey · England
Non-slip bath & shower coating in Woolmer Hill, Surrey
Clear non-slip coatings for baths and shower trays in Woolmer Hill, carried out at your home and guaranteed for a year.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Non-slip bath coating in Woolmer Hill, done in place
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. We work on resurfaced baths, wet room floors (ask us) and shower trays, and common reasons people contact us are a bath or tray that is slippery when wet and worn-out textured areas.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Woolmer Hill (GU27)
- Area hub
- Surrey
- Cover
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Woolmer Hill
Woolmer Hill is about 1 mile south-west of Haslemere, in Surrey. From the centre of Woolmer Hill to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Woolmer Hill is one of 395 towns and villages in Surrey where we work. Our nearest city page is London, about 41 miles away.
Our technicians cover all of GU27 and the streets around it. We regularly work on streets such as Moor Road, Copse Road and Hammer Lane. Other places close to Woolmer Hill include Hammer (1 mile north), Hammer Bottom (1 mile north-west), Shottermill (1 mile north-east), Linchmere (1 mile south-west) and Bramshott Chase (1 mile north). We also work in nearby towns such as Guildford (14 miles north-east), Farnham (9 miles north), Cranleigh (12 miles east), Ash (12 miles north), Godalming (9 miles north-east) and Farncombe (10 miles north-east).
Near you in Woolmer Hill
We visit homes around Mill Tavern, Woolmer Hill School and Camelsdale Primary School. You’ll also find St Paul (0.7 miles east) and Woolmer Hill School (0.9 miles north). The nearest railway station is Haslemere station, roughly 1.5 miles north-east. Further afield, we also cover the area around Haslemere and District Hospital (2 miles north-east). Green spaces nearby include Lynchmere Commons and Wheeler's Down.
Repair or replace in Woolmer Hill?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. The price reflects the work involved, not where you live. You’ll see the full price before booking, with no extras added later.
Why choose Surface Doctor in Woolmer Hill
- One price list for the whole UK
- Accredited with CHAS, Constructionline and SafeContractor
- Normally one visit, start to finish
- Every repair guaranteed for a year
Read our pricing.
Questions from Woolmer Hill
Do you come to Woolmer Hill?
Yes. We cover the whole UK and come to Woolmer Hill and the rest of Surrey. Send us photos for a fixed quote, or call 0345 017 0787.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
How do I get a price for non-slip bath coating in Woolmer Hill?
The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Surrey.
Landlords, agents and businesses in Woolmer Hill
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
The process
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours, and we will keep you posted as we go.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
How to get a price
Upload a picture of the damage and a wider shot of the entire item, with your GU27 postcode, and we will reply with a fixed price.
Read more
Prices and what affects them
Quotes are free and the price is fixed. What we look at:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- The material
- Whether we combine several jobs
Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- The material, if you know it
- Details of any past repairs
- A clear, close picture of the problem area
For a price in Woolmer Hill, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Also near Woolmer Hill
What else we do in Woolmer Hill
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we’re called out for in Woolmer Hill
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Safety for older or less mobile people
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
What your quote should include
- Whether the price is fixed and includes VAT
- How your room will be protected
- Aftercare advice
- How long it needs to cure
When a repair isn’t the answer
Before you book, it’s worth knowing the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we repair
- Resurfaced baths
- Shower trays
- Wet room floors (ask us)
- Acrylic baths
- Enamelled baths
About our accreditations · Every repair comes with a one-year guarantee.
