Gwynedd · Wales

Bath and surface repairs in LL53

Repairs and resurfacing across LL53, from Pwllheli, Morfa Nefyn and Pen-rallt. Free, fixed quotes from your photos and a one-year guarantee.

Book a repair in LL53

How bath repair works in LL53

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. Our repair technicians work on cast iron enamel, roll-top & freestanding and acrylic, and the jobs we see most are damage beneath the taps and cracks in an acrylic bath.

We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes a few hours, depending on the damage. At the end we talk you through the curing time and the aftercare.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, usually by the following day, the bath is ready to use.

Prices in LL53

Our bath repair starts from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why clients in LL53 choose us

  • We’ll tell you if it’s not worth repairing
  • Work done at your home or business
  • A fixed quote before booking
  • Dust sheets down, tidy finish

How to get a price

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.

Local landmarks in Pwllheli

We visit homes around Capel Salem, The Mitre pub and Ysgol Cymerau, among other places. There’s a railway station in Pwllheli itself: Pwllheli station. Well-known places in the area include Pwllheli Hospital (Former Workhouse Building) (less than half a mile west) and Tomen Tŷ Newydd (2.6 miles north-west). For a walk, there is Clogwynbach and Lôn Cob Bach.

  • Parks and local facilities nearby include Pwllheli South (0.6 miles south)

Repairing versus replacing

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes.

Comparing quotes

  • What preparation is included
  • Who turns up on the day
  • What the guarantee covers, and for how long
  • Is the price fixed, and does it include VAT?

How we price bath repair

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • Whether it’s a chip, crack, burn or wear
  • How easy the damage is to reach
  • Unusual colours or finishes
  • Whether we combine several jobs

Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Quotes from your pictures

Two or three clear photos are normally enough. Try to include:

  • One picture of the entire bath
  • Where you are, by postcode
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

What we are called out for in LL53

Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.

You may need us if you’ve spotted:

  • Chips under the taps
  • Chips along the edge of the bath
  • A hole punched through by something heavy
  • A cracked acrylic bath

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

Honest limits

A few problems are outside what a surface repair can do:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Flexing caused by a failed cradle or loose feet

FAQs for LL53

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.

Is a cracked acrylic bath repairable?

Normally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

Will there be a smell?

There may be a mild smell during the work.

Can you repair a failed DIY repair?

Regularly. We strip it out, deal with any rust and repair it again.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.