Stockport · England

Bath and surface repairs in SK8

Bath, tray, sink and worktop repairs across SK8, from Cheadle Hulme, Cheadle and Gatley. Free, fixed quotes from your photos and a one-year guarantee.

Need a repair in SK8?

Bath repair across SK8: what to expect

A typical bath repair is a few hours’ work, and the bath is back in use the next day. You will not need a plumber or tiler, because the bath does not move. Common call-outs are for rust by the waste and overflow and a chip where the taps sit, on cast iron enamel, whirlpool & spa baths and acrylic.

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

Pricing in SK8

Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for SK8. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why choose Surface Doctor

  • Work done at your home or business
  • A year’s guarantee on all work
  • Colours mixed by hand to suit your surface
  • Everything repaired in place

Ask for a price

The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say right away whether it can be repaired.

Near you in Cheadle Hulme

Locally, our jobs take us to homes close to All Saints, Hulme Hall Grammar School and Cheadle Hulme High School and the streets around them. Nearby too are Meriton Road Park (1.9 miles south-west) and Bradshaw Hall Primary School (0.6 miles west). There is a railway station in Cheadle Hulme itself: Cheadle Hulme station. Further afield, we also cover the area around Merseyway Shopping Centre (3.1 miles north-east) and Hat Works (2.8 miles north-east). The countryside around Cheadle Hulme includes Lindow Common.

  • Local facilities include Stockport Etchells (2.8 miles north-west)

Common problems we fix in SK8

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Typical reasons for a call-out include:

  • A cracked acrylic bath
  • A hole punched through by something heavy
  • Rust spots around the plughole
  • An old repair that has yellowed or come loose

Landlord and trade work in SK8

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Prices and what affects them

Prices start from £95. There’s no area surcharge for SK8. The price reflects:

  • The size and number of damaged areas
  • The colour and finish to match
  • The material and finish
  • Whether old repairs or coatings need taking off

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Quotes from your pictures

Phone photos are fine, there is no need for anything special. Just make sure we can see:

  • A coin beside the damage so we can judge size
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates
  • Details of any past repairs

Most customers in SK8 get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

Common questions in SK8

Will there be a smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

What information do you need?

Use the quote form or ring 0345 017 0787.

What does bath repair cost?

Prices start from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your SK8 postcode.

When can I have a bath again?

Normally by the following day, depending on the repair.

Can you quote from photos?

In nearly every case. If photos do not show enough, we will ask for another angle.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day.

Can you fix rust around the plughole?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.