Buckinghamshire · England
Shower tray repair & resurfacing in Beaconsfield, Buckinghamshire
Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Beaconsfield and across Buckinghamshire. Send pictures for a free, fixed quote.
- Repairs from £95
- Scratches from cleaning or grit
- Chips on the edges
Shower tray repair at your home in Beaconsfield
A cracked or chipped shower tray doesn’t always need replacing. If it’s solid underneath, it can normally be repaired in place, which is far less work than a replacement. Our repair technicians work on acrylic, enamelled steel and cast iron, and common reasons people contact us are a tray that flexes and a crack across the base.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Beaconsfield (HP9)
- County
- Buckinghamshire
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Beaconsfield
Repairs from £95. We do not charge extra for travel to Beaconsfield. The price depends on:
- The material
- Doing more than one item at once
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- What it’s made of, if you know
- A clear, close picture of the problem area
- A picture taken from further back
- Natural light rather than flash
Most customers in Beaconsfield get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
What your shower tray is made of matters
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and repairs are matched to the gel coat.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.
Landlords, agents and businesses in Beaconsfield
For anyone letting property in or around Beaconsfield, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Questions from Beaconsfield
Is a cracked tray repairable?
Often. If the tray moves, the support needs fixing first.
How do I get a price for shower tray repair in Beaconsfield?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
How do I book?
Photos of the damage, a picture of the whole shower tray and your postcode. Then we will agree a date.
Is a cracked shower tray safe to use?
We’d stop using it until it’s repaired, because water may be getting underneath.
Can you resurface a whole tray?
Yes. The whole tray can be resurfaced without removing it.
Can you quote from photos?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Keeping it looking good
Looking after the surface is easy:
- Use the extractor fan
- Use a mild, non-abrasive cleaner
- Avoid strong descalers and bleach
- Store bottles off the tray
Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep the sealant in good condition so water can’t get underneath.
A small crack lets in a little water every time you shower, which can damage the floor over time. Getting it repaired quickly is much cheaper than fixing a floor.
About Beaconsfield
Beaconsfield is about 5 miles east of High Wycombe, in Buckinghamshire. Jobs in Beaconsfield are booked in like any other job: a fixed quote from photos, then a visit to do the work. Beaconsfield is one of 263 towns and villages in Buckinghamshire where we work. Our nearest city page is London, about 25 miles away.
Our visits in HP9 work the same way as everywhere else we cover. Local streets include Station Road, Malthouse Square and Gregories Farm Lane, and we cover them all. Beaconsfield is on the A40 and B474, which makes it straightforward to reach. Neighbouring places we cover include Ledborough (1 mile north-east), Forty Green (1 mile north-west), Knotty Green (1 mile north), Seer Green (2 miles east) and Beacon Hill (2 miles north-west). Within a short drive, we also cover High Wycombe (5 miles west), Chesham (7 miles north), Marlow (6 miles south-west), Amersham (5 miles north-east), Chalfont St Peter (4 miles east) and Southcourt (15 miles north-west). Being one of Buckinghamshire’s larger places, Beaconsfield sees plenty of our work.
What’s near Beaconsfield
Around Beaconsfield, we work in homes near The Chiltern pub, Beaconsfield High School and Butlers Court School and the streets around them. Nearby too are Church of St Michael and All Angels (within half a mile north-east) and Davenies School (less than half a mile east). Beaconsfield has its own railway station: Beaconsfield station. Other landmarks nearby include High Wycombe Castle (4.6 miles west) and Chalfonts and Gerrards Cross Hospital (3.7 miles east). Open spaces near Beaconsfield include Holtspur Bank.
Nearby places to Beaconsfield
Also in Beaconsfield
Common problems we fix in Beaconsfield
Stone resin trays are rigid, so they crack rather than bend when they sit on an uneven or poorly supported floor. Timber floors that move can cause it too.
Look out for any of the following:
- Staining and dullness across the tray
- Edge chips from dropped bottles
- A crack across the base
- Damage around the waste
What your quote should include
- Is the price fixed, and does it include VAT?
- What preparation is included
- What the guarantee covers, and for how long
- How long it needs to cure
The process
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a few hours, or most of the day to resurface the whole tray from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.
- We check the tray is firmly supported and find the cause of any crack.
- We clean and prepare the damaged area or the entire tray.
- Chips and cracks are filled, reinforced and sanded level.
- We colour-match the repair, or spray a new finish across the whole tray.
- The tray is left to cure and can generally be used the day after.
Preparing for the visit
- Open a window if you can
- Keep pets and children out of the room while we work
- Let us know about parking or access
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair will not do:
- A tray that flexes because it was never properly supported
- Leaking waste fittings
- Rotten or damaged flooring underneath
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Ceramic
- Cast iron
- Enamelled steel
- Acrylic
- Stone resin
About our accreditations · Every repair comes with a one-year guarantee.
