Kent · England

Shower tray repair & resurfacing in Bramling, Kent

Problem with your shower tray in Bramling? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Movement when you stand on it
  • A tray that looks tired however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Bramling

DIY kit or professional repair?

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

How we handle shower tray repair in Bramling

A worn or stained tray can be resurfaced, for a clean, uniform finish without removing the screen or tiles. Whether it’s a tray that creaks or moves underfoot and a crack across the base, we can help, on enamelled steel, acrylic and ceramic alike.

Whatever the size of the job, it’s backed by a one-year guarantee.

Discoloured square shower tray restored with a new white finish
Location
Bramling (CT3)
Area hub
Kent
Warranty
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Why repair rather than replace?

Replacing a tray normally means refitting the screen, retiling and resealing. A repair leaves all of that untouched. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why Bramling customers choose us

  • A year’s guarantee on all work
  • Free fixed quotes from pictures
  • Colour-matched on site
  • Same prices wherever you are

Take a look at our pricing.

What affects the price in Bramling

Prices start from £95. You won’t pay by the hour. The price depends on:

  • Doing more than one item at once
  • Previous DIY repairs that have to come out
  • How easy the damage is to reach
  • The colour and finish to match

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Send pictures for a quote

You can take the pictures on your phone. Just make sure we can see:

  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings
  • What it’s made of, if you know
  • A photo taken from further back

For a price in Bramling, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Bramling and nearby

Bramling is about 5 miles east of Canterbury, in Kent. Our repair technicians come to homes and businesses in Bramling and the surrounding area, so nothing has to leave your home. Bramling is one of 922 towns and villages in Kent where we work. We work right across the region, from Bramling to London (58 miles away).

Jobs in CT3 work the same way as everywhere else we cover. Streets in the area include Wingham Well Lane and Bramling Road. Nearby, we also work in Ickham (1 mile north-west), Seaton (1 mile north), Wickhambreaux (1 mile north), Littlebourne (1 mile north-west) and Adisham (2 miles south). Larger places within reach include Canterbury (5 miles west), Margate (11 miles north-east), Dover (10 miles south-east), Folkestone (13 miles south), Ramsgate (11 miles north-east) and Broadstairs (12 miles north-east).

Near you in Bramling

Locally, our jobs take us to homes close to Wingham Primary School, The Haywain Public House and Church of St John and the streets around them. For rail, the closest station is Adisham station, roughly 1.7 miles south. A little further out are St Martins Hospital (3.8 miles west).

Map of Bramling © OpenStreetMap contributors

Materials and what they mean for the repair

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.

When we’d advise against a repair

Not everything can be repaired, and we would rather say so up front. Repairs will not solve:

  • A tray that flexes because it was never properly supported
  • Rotten or damaged flooring underneath
  • Leaks from the waste or pipework (a plumber’s job)

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we work on in Bramling

  • Stone resin
  • Ceramic
  • Enamelled steel
  • Acrylic
  • Cast iron

Common questions in Bramling

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How do I book?

Just photos, your postcode and a contact number. On the day, access to the room.

What happens once I’ve sent pictures?

We come back with a fixed price, plus dates. There’s no obligation to book.

Which areas do you work in?

We cover the whole UK, including Bramling and the rest of Kent. Just include your postcode and we’ll offer you dates.

Can I add another job to the visit?

Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.

Is there a call-out fee?

There is no separate call-out charge. The fixed price covers the visit and the work.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

I’m a tenant. Can you help?

We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Looking after it afterwards

It’s all simple stuff, just a few sensible habits:

  • Use a mild, non-abrasive cleaner
  • Replace failing sealant promptly
  • Use the extractor fan
  • Don’t ignore a tray that flexes

Store heavy bottles on a shelf, not on the tray, to avoid chips.

Stop using the shower if the tray is cracked. Water can get through to the floor and walls, and the damage below is not visible.

How it works

Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours for a repair, longer for a full resurface.

  1. We protect the floor and the enclosure.
  2. Old sealant is removed if it’s in the way.
  3. We clean and key the tray, then repair the damage.
  4. We refinish the surface to match the tray.
  5. We clean up and give you the curing time.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Mention if the room is upstairs or in a flat
  • Keep a parking space free if you can

How to get a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.

Send pictures for a quote

Read more

For landlords and businesses

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.