Dorset · England

Shower Tray Repair in Cranborne

Shower tray repair for Cranborne, without a refit. Send us photos for a fixed price, then book a visit.

  • Repairs from £95
  • A tray that flexes
  • Chips on the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Cranborne?

How we handle shower tray repair in Cranborne

The first thing we do is check the tray: a tray that moves needs its support sorted first, otherwise any crack returns. We will tell you if that is the case. Typical jobs include chips on the edges and chips caused during fitting, across enamelled steel, stone resin and ceramic.

The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.

Area
Cranborne (BH21)
Area hub
Dorset
Guarantee
One year on every repair
Price
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Different materials, different repairs

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.

Stone resin

Stone resin is a dense, rigid material with a smooth gel coat. They crack if the base isn’t fully supported, and chips are filled and matched to the surface.

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

What we can’t put right

A few problems are outside what a surface repair can do:

  • Leaks from the waste or pipework (a plumber’s job)
  • A tray broken in more than one place
  • A tray that flexes because it was never properly supported

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Stone resin
  • Ceramic
  • Cast iron
  • Enamelled steel
  • Acrylic

Cranborne and nearby

Cranborne is about 4 miles north-west of Verwood, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Cranborne is one of 462 places in Dorset we cover.

We work across BH21 and the streets around it. Jobs here include addresses on High Street, Water Street and Penny's Lane. Neighbouring places we cover include Edmondsham (1 mile south), Wimborne St Giles (2 miles south-west), Broxhill (2 miles east), Woodlands (3 miles south) and Whitmore (3 miles south). Further out, we also cover Christchurch (14 miles south-east), Wimborne Minster (8 miles south), Blandford Forum (11 miles west), Verwood (4 miles south-east), Shaftesbury (13 miles north-west) and Ferndown (8 miles south).

Around Cranborne

Around Cranborne, we work in homes near Cranborne Priory Church, Cranborne Church of England Voluntary Aided First School and Sheaf of Arrows pub. Nearby you’ll also find Cranborne Castle Hill (within half a mile south).

Map of Cranborne © OpenStreetMap contributors

Prices and what affects them

Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:

  • Unusual colours or finishes
  • The size and number of damaged areas
  • The material and finish
  • Doing more than one item at once

We charge the same wherever you are, with no extra for Cranborne. What changes the price is the job itself: the material, the amount of damage and how many items.

How to get a fixed price

You can usually get a fixed quote without us visiting. To help us price it:

  • The postcode, so we can plan the visit
  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage
  • A wider photo showing the entire shower tray

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the shower tray, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Common problems we fix in Cranborne

Heavy bottles, shower heads and dropped razors chip trays, typically on the edges or near the plughole.

It’s worth getting a quote if you see:

  • Scuffs and light scratches
  • Chips on the edges
  • Snagging damage in a new bathroom
  • Staining and dullness across the tray

What to look for in a quote

  • How soon you can use it again
  • How changes to the job are handled
  • Is the price fixed, and does it include VAT?
  • Whether cleaning and preparation are in the price

10 questions to ask before you book

Repairing versus replacing in Cranborne

Replacing a tray typically means removing the screen and tiling, relaying the base and tiling again. A repair or resurface leaves all of that alone. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • We leave the room as we found it
  • A year’s guarantee on all work
  • Colour-matched on site

See our full price list.

Common questions in Cranborne

Do you do work for letting agents?

Yes, frequently. We can quote for several properties together and work between tenancies.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Can you do more than one item on the same visit?

Of course, and it typically saves money. Send pictures of everything together and we will quote them together.

Do the materials smell?

There may be a mild smell during the work that clears as it cures.

Which areas do you work in?

Everywhere in the UK, Cranborne included. Travel is included in the price.

Is a cracked shower tray safe to use?

Only if you’re sure it is not leaking. Check the ceiling below for damp.

Do you work in Cranborne?

Yes, we do. Technicians travel to Cranborne from across the region, with no extra charge for travel.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Looking after it afterwards

Most damage we see is avoidable. These habits help:

  • Store bottles off the tray
  • Reseal when the silicone splits or turns black
  • Use a mild, non-abrasive cleaner
  • Give the tray a quick rinse after use

Store heavy bottles on a shelf, not on the tray, so they cannot be knocked over.

Act on split sealant early. It lets water behind the tray and can damage the floor below.

The process

There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to a few hours, or most of a day for a full resurface, tidy-up included.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. We shape the repair, match the colour and finish it.
  5. We leave it to cure, normally until the following day.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Keep a parking space free if you can
  • Let us know which floor the room is on

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.