Rutland · England

Shower tray repair & resurfacing in Exton, Rutland

Problem with your shower tray in Exton? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Staining and dullness across the tray
  • Movement when you stand on it
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair for Exton homes

Shower tray repair in Exton, done in place

Stone resin, acrylic and ceramic trays can all be repaired, and worn trays can be resurfaced completely. Nothing is taken out, so the enclosure and tiles are not disturbed. We regularly repair acrylic, cast iron and enamelled steel, and common reasons people contact us are cracks running from the waste and scratches in the surface.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.

Stained shower tray resurfaced to clean white, before and after
Area
Exton (LE15)
County
Rutland
Warranty
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Do not ignore a tray that flexes
  • Keep heavy bottles on a shelf
  • Check the seal every few months
  • Ventilate the room after showers

Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.

Act on split sealant early. Water gets behind and under the tray and can damage the floor below.

Honest limits

In fairness, some problems need a different fix:

  • A tray broken in more than one place
  • Damage below the tray that needs a builder
  • Movement caused by a poor base, until the support is fixed

Send us pictures and we will tell you honestly before booking.

What we work on

  • Stone resin
  • Acrylic
  • Cast iron
  • Enamelled steel
  • Ceramic

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

FAQs for Exton

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Do you come to Exton?

Yes, we do. We send a technician to Exton for every job, with no extra charge for travel.

Can you resurface a whole tray?

Yes. A full resurface makes a tired tray look fresh.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How long does it take to cure?

You will get the exact time when we finish.

Are there extra charges for Exton?

Travel is included in the price, and we charge the same wherever you are.

Which areas do you work in?

We work UK-wide. Our prices are the same everywhere.

Can you price it without visiting?

Normally, yes. Clear photos let us give you a fixed price without visiting.

Repair or replace: which is better?

If the tray is solid and the crack hasn’t let water spread, repair is typically best. If the floor is damaged or the tray is badly cracked, replacement may make more sense. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Why choose Surface Doctor in Exton

  • Accredited with CHAS, Constructionline and SafeContractor
  • A fixed quote before booking
  • No extra charge for your area
  • Honest advice, even when it means no job

Take a look at our prices page.

How it works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours for a repair, longer for a full resurface. If anything looks different from your photos, we will talk to you before going ahead.

  1. The surrounding area is sheeted and masked.
  2. Any sealant in the way is cut out.
  3. We clean and key the tray, then repair the damage.
  4. The surface is refinished to match.
  5. We clean up and give you the curing time.

Preparing for the visit

  • Let us know about parking or access
  • Make sure the room can be ventilated
  • Clear the area around the damage

Ask for a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Send pictures for a quote

Advice

Our work in Exton

Exton is about 4 miles east of Oakham, in Rutland. Across the LE15 area, a technician comes to you. Our technicians cover 47 places across Rutland. Our nearest city page is Birmingham, about 55 miles away.

Jobs in LE15 work the same way as everywhere else we cover. That includes homes on High Street, Blacksmith's Lane and Stamford Road. We also travel to Whitwell (2 miles south), Burley (2 miles west), Normanton (3 miles south), Edith Weston (4 miles south) and Lyndon (4 miles south). Within a short drive, we also cover Oakham (4 miles west), Uppingham (8 miles south-west), Barleythorpe (5 miles west), Langham (5 miles west) and Whissendine (7 miles west). As one of the bigger places in Rutland, Exton is somewhere we visit often.

Landmarks near Exton

Our clients here include homes close to Church of Saint Peter and Saint Paul, Exton Hall and Exton and Greetham CofE Primary School and the streets around them. The closest station to Exton is Oakham station, about 4.5 miles west. Further afield, we also cover the area around Burley Castle (2.1 miles west) and Rocks by Rail (3 miles north-west). Open spaces near Exton include Merry's Meadows.

Map of Exton © OpenStreetMap contributors

Signs you need shower tray repair in Exton

A tired-looking tray is frequently the result of years of cleaning: limescale, harsh chemicals and abrasive pads strip the surface finish.

Most people get in touch when they notice something like this:

  • Edge chips from dropped bottles
  • Staining and dullness across the tray
  • Chips caused during fitting
  • Chips or cracks by the plughole

What your quote should include

  • The length of the guarantee and what it covers
  • Whether the price is fixed and includes VAT
  • Whether the price covers travel
  • Who turns up on the day

Our hiring checklist

What shower tray repair costs

Repairs from £95. Prices are worked out job by job, from your photos. What matters most is:

  • The type of damage
  • What the surface is made of
  • Doing more than one item at once
  • How hard the colour is to match

Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Getting a price from photos

Two or three clear pictures are generally enough. It helps if you send:

  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • Your postcode, so we can check dates
  • What it’s made of, if you know

Most clients in Exton get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Repairs by material

Acrylic

Acrylic-capped trays are lighter, so good support matters. We repair cracks and scratches.

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so it’s worth repairing early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.