West Sussex · England
Shower tray repair & resurfacing in Halnaker, West Sussex
Shower tray chip, crack and scratch repairs and resurfacing for householders, landlords and businesses in Halnaker. Send photos for a free, fixed quote.
- Repairs from £95
- A crack across the base
- A tray that creaks or moves underfoot
Shower tray repair in Halnaker without replacing anything
Shower tray repairs are one of our most common jobs. Chips by the waste, cracks across the base and dull, stained surfaces can all be put right without removing the tray. We’re often asked to fix scratches in the surface and a tray that flexes, across ceramic, stone resin and enamelled steel.
Every repair is covered by a one-year guarantee, wherever you are in West Sussex.
- Area
- Halnaker (PO18)
- Area hub
- West Sussex
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Keeping it looking good
Looking after the surface is easy:
- Check the seal every few months
- Rinse the tray after each shower
- Use a mild, non-abrasive cleaner
- Avoid strong descalers and bleach
Store heavy bottles on a shelf, not on the tray, so they can’t be knocked over.
If the tray creaks or moves, get it checked, before it cracks.
What we’re called out for in Halnaker
Dull and stained trays are normally down to cleaning: abrasive pads, strong chemicals and limescale wear the finish away.
You may need us if you’ve spotted any of these:
- Scratches in the surface
- Chips caused during fitting
- A tray that creaks or moves underfoot
- A damaged area around the waste
Comparing quotes
- How changes to the job are handled
- How long it needs to cure
- How the colour is matched
- What prep work is covered
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
FAQs for Halnaker
Do you cover Halnaker?
Yes, we do. We send a technician to Halnaker for every job, and the price is the same as everywhere else.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Which areas do you work in?
We cover the whole UK, including Halnaker and the rest of West Sussex. Send your postcode with your photos and we will confirm dates.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
How we price shower tray repair
Repairs from £95. There is no area surcharge for Halnaker. What changes the price is:
- The material and finish
- The type of damage
- The colour and finish to match
- Doing more than one item at once
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- A coin or ruler next to the damage for scale
- The material, if you know it
- Your postcode, so we can check dates
- A wider photo showing the whole shower tray
A quote takes minutes to ask for: take one close-up and one wider shot of the shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow a few hours for a repair, longer for a full resurface. Before we go, we will explain how long to leave it and how to look after it.
- First we check the tray is solid and work out why any crack happened.
- The damaged area, or the entire tray, is cleaned and prepared.
- We fill and strengthen any chips or cracks and sand them smooth.
- We match the colour, or refinish the full tray.
- Once cured, normally by the next day, you can use the shower.
Getting ready for the visit
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole shower tray, we can give you a fixed price without visiting.
Related advice
What a repair can’t fix
A repair is not always the answer, and we will tell you before we start. Repairs will not solve:
- Leaks from the waste or pipework (a plumber’s job)
- Damage below the tray that needs a builder
- A tray that flexes because it was never properly supported
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Acrylic
- Cast iron
- Ceramic
- Stone resin
- Enamelled steel
Repair or replace: which is better?
Trays sit under the screen and tiles, so taking one out disturbs a lot. A repair keeps everything as it is. Prices start from £95. The price reflects the work involved, not where you live. The full price is agreed before you book.
Why Halnaker clients choose us
- Colour-matched on site
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
Read our pricing.
Halnaker and the surrounding area
Halnaker is about 3 miles north-east of Chichester, in West Sussex. Clients in Halnaker get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Halnaker is one of 371 towns and villages in West Sussex we cover. Our jobs stretch from Halnaker to London (about 51 miles away).
Every address in PO18 is covered, from the main roads to the quietest streets. From The Street, Stame Road and Oakford Park or anywhere nearby, we can come to you. If you are just outside Halnaker, we cover Boxgrove (1 mile south), Waterbeach (1 mile west), Tangmere (1 mile south), Strettington (1 mile south-west) and Westerton (1 mile west). Further out, we also cover Worthing (14 miles east), Bognor Regis (5 miles south), Chichester (3 miles south-west), Selsey (10 miles south), Littlehampton (9 miles south-east) and Emsworth (10 miles west).
Near you in Halnaker
Around Halnaker, we work in homes near The Priory Church of St Mary and St Blaize and Boxgrove CofE Primary School and the streets around them. Halnaker’s nearest station is Chichester station, about 3.8 miles south-west. Other landmarks nearby include Chichester Centre (2.9 miles south-west) and The Chichester City Museum (3.4 miles south-west). Not far away are Levin Down.
Also near Halnaker
More services for Halnaker
About our accreditations · Every repair comes with a one-year guarantee.
