Kent · England

Shower Tray Repair in Hoaden

Shower tray repair across Hoaden and nearby, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • Damage from a refit or building work
  • A damaged area around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Hoaden

Keeping it looking good

Much of the damage we repair could have been avoided. These habits help:

  • Ventilate the room after showers
  • Use a mild, non-abrasive cleaner
  • Don’t ignore a tray that flexes
  • Do not stand heavy bottles on the tray

Wait the full curing time before you shower. After that, mild cleaners and good ventilation are all it needs.

If the tray creaks or moves, get it checked, before it cracks or gets worse.

Shower tray repair at your home in Hoaden

In most cases, a damaged tray can be repaired where it is, from chipped edges to cracks across the floor of the tray. The colour and finish are matched. If you are dealing with scratches in the surface and a cracked shower tray, we can normally put it right, on cast iron, acrylic and ceramic alike.

A one-year guarantee comes as standard.

Area
Hoaden (CT3)
Region
Kent
Cover
A year, on every repair
Quotes
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What affects the price in Hoaden

Prices start from £95. You won’t pay by the hour. The price depends on:

  • How many areas need work
  • How easy the damage is to reach
  • Any earlier repairs that need removing first
  • Whether it’s a chip, crack, burn or wear

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A coin beside the damage so we can judge size
  • Any earlier repairs or coatings
  • Any details about the material
  • Daylight if possible, and no flash reflection

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Materials and what they mean for the repair

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.

Ceramic

Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and the repair is polished to match the shine.

How it works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, or most of the day to resurface the whole tray, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We check the tray is firmly supported and find the cause of any crack.
  2. Next we clean and prepare the tray.
  3. We fill and reinforce chips and cracks, then sand them flush.
  4. We match the colour, or refinish the full tray.
  5. We leave it to cure; the shower is usually usable the following day.

How to prepare

  • Make sure the room can be ventilated
  • Let us know which floor the room is on
  • Clear the area around the damage

How to get a price

Most clients in Hoaden get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a fixed price

Advice

Hoaden: your questions answered

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Is a cracked tray repairable?

In most cases. A tray that moves needs its support sorting before the repair.

How do I book?

Use the quote form or ring 0345 017 0787.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Do you redo the sealant?

We can. It’s a good time to replace old sealant.

What we are called out for in Hoaden

Rigid trays do not bend, they crack if the floor beneath them isn’t flat and fully supported. Movement in a timber floor has the same effect.

Common reasons people in Hoaden contact us are:

  • A tray that looks tired however much you clean it
  • A crack across the base
  • Edge chips from dropped bottles
  • A tray that flexes

Questions to ask before you book

  • How the room is protected while they work
  • A fixed price, and whether VAT is included
  • How soon you can use it again
  • What the guarantee covers, and for how long

10 questions to ask before booking

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Repair or replace in Hoaden?

The tray is typically the last thing fitted and the first thing tiled up to, so taking one out disturbs a lot. A repair keeps everything as it is. Repairs from £95, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Why book with us

  • Honest advice, even when it means no job
  • Colours mixed by hand to suit your surface
  • No need to remove anything
  • Technicians who travel to you, UK-wide

Read our prices page.

When a repair is not the answer

Not everything can be repaired, and we will tell you before we start. Repairs will not solve:

  • Water damage to the floor beneath the tray
  • A tray that flexes because it was never properly supported
  • A tray broken in more than one place

If in doubt, send photos and we will say what we think before booking.

Surfaces we repair

  • Cast iron
  • Ceramic
  • Stone resin
  • Enamelled steel
  • Acrylic

Hoaden and the surrounding area

Hoaden is about 7 miles east of Canterbury, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover all 922 towns and villages across Kent. We work right across the region, from Hoaden to London (about 60 miles away).

Our visits in CT3 are booked in the same way as anywhere else. Streets in the area include Overland Lane and Walmestone Road, and we cover them all. Nearby, we also work in Nash (1 mile south-west), Perry (1 mile west), Elmstone (1 mile north-west), Shatterling (1 mile south-west) and Durlock (1 mile south-east). We also work in nearby towns such as Canterbury (7 miles west), Margate (9 miles north-east), Dover (11 miles south), Folkestone (15 miles south), Ramsgate (8 miles north-east) and Broadstairs (9 miles north-east).

Near you in Hoaden

Our customers here include homes close to Elmstone Church and Ash Cartwright and Kelsey Church of England Primary School and the streets around them. For rail, the closest station is Minster station, roughly 4 miles north-east. A little further out are White Mill (3.5 miles east). The countryside around Hoaden includes Monk's Wall nature reserve.

Map of Hoaden © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.