Dumfries and Galloway · Scotland

Shower tray repair & resurfacing in Kirkpatrick-Fleming, Dumfries and Galloway

Fixed-price shower tray repair in Kirkpatrick-Fleming and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • Chips on the edges
  • Scratches from cleaning or grit
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Kirkpatrick-Fleming

About our shower tray repair in Kirkpatrick-Fleming

You do not always need a new tray. If it’s solid underneath, it can usually be repaired in place, which is far less work than a replacement. Our repair technicians work on enamelled steel, cast iron and acrylic, and common reasons people contact us are a tray that creaks or moves underfoot and cracks running from the waste.

You get a one-year guarantee, the same in Kirkpatrick-Fleming as everywhere else we work.

Stained shower tray resurfaced to clean white, before and after
Where
Kirkpatrick-Fleming (DG11)
Region
Dumfries and Galloway
Guarantee
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026

When to call us in Kirkpatrick-Fleming

Trays fitted on timber floors can crack if the floor moves, especially if the tray wasn’t bedded properly. On solid floors, cracks normally point to an uneven base.

It’s worth getting a quote if you see:

  • A tray that flexes
  • A crack across the base
  • Chips caused during fitting
  • Scratches in the surface

Before you book anyone

  • Whether cleaning and preparation are in the price
  • A fixed price, and whether VAT is included
  • Whether they match the colour on site
  • What protection goes down before work starts

How to compare quotes

When a repair isn’t the answer

We’ll always be straight with you, so here’s what a repair won’t do:

  • Water damage to the floor beneath the tray
  • Plumbing leaks under the tray
  • A tray that moves underfoot

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Ceramic
  • Stone resin
  • Acrylic
  • Cast iron
  • Enamelled steel

Landlords, agents and businesses in Kirkpatrick-Fleming

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We are used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.

Materials and what they mean for the repair

Enamelled steel

Enamelled steel trays behave like steel baths. Exposed metal can rust, so it’s worth repairing early.

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and the repair is polished to match the shine.

About Kirkpatrick-Fleming

Kirkpatrick-Fleming is about 13 miles north-west of Carlisle, in Dumfries and Galloway. We visit clients in Kirkpatrick-Fleming and the surrounding area, so nothing has to leave your home. Kirkpatrick-Fleming is one of 138 towns and villages in Dumfries and Galloway where we work. You can also see our page for Newcastle upon Tyne, about 60 miles away.

Jobs in DG11 are booked in the same way as anywhere else. Jobs here include addresses on Edengrove, Grahamsfield and Burnholm Road and the roads around them. Nearby, we also work in Eastriggs (3 miles south), Eaglesfield (3 miles north-west), Dornock (4 miles south-west), Gretna Green (4 miles south-east) and Springfield (4 miles south-east). We also work in nearby towns such as Annan (5 miles south-west), Lockerbie (11 miles north-west), Langholm (10 miles north-east), Lochmaben (14 miles north-west) and Ecclefechan (5 miles north-west).

Landmarks near Kirkpatrick-Fleming

Our customers here include homes close to Kirkpatrick Fleming Parish Church, among other places. For rail, the closest station is Gretna Green station, roughly 3.7 miles south-east. Nearby you’ll also find The Devil’s Porridge Museum (3 miles south) and Annan Hospital (4.8 miles south-west).

Map of Kirkpatrick-Fleming © OpenStreetMap contributors

Questions from Kirkpatrick-Fleming

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How much does shower tray repair cost in Kirkpatrick-Fleming?

Repairs from £95. Because every job differs, we price from photos. You will get a fixed figure before you book.

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

What areas do you cover?

Across the UK. Our prices are the same everywhere.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

What do you need from me?

Just pictures, your postcode and a contact number. On the day, access to the room.

Can you fix a cracked tray?

Often. A tray that moves needs its support sorting before the repair.

Can you redo someone else’s repair?

Yes, we frequently do. It can add a little time, which we include in the quote.

Looking after it afterwards

It’s all simple stuff:

  • Rinse the tray after each shower
  • Keep harsh chemicals off the tray
  • Keep heavy bottles on a shelf
  • Check the seal every few months

Store heavy bottles on a shelf, not on the tray, to avoid chips.

A tray that moves underfoot needs looking at, before it cracks or gets worse.

Repairing versus replacing in Kirkpatrick-Fleming

A new shower tray often means a new enclosure fitting, new tiling and new sealant. A repair leaves all of that untouched. Repairs from £95, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

What you get with us

  • A fixed quote before booking
  • Technicians who travel to you, UK-wide
  • One price list for the whole UK
  • Most jobs done in one visit

See our full price list.

The process

We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a few hours, or most of a day for a full resurface. We leave the room clean.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour-matched and finished.
  5. We leave it to cure, normally until the following day.

How to prepare

  • Let the surface dry out before the visit
  • Mention any earlier repairs or resurfacing
  • Keep a parking space free if you can

Getting a price

Upload a photo of the damage and one of the entire item, with your DG11 postcode, and we will come back with a fixed quote.

Send photos for a quote

Read more

DIY kit or professional repair?

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.