Derbyshire · England

Shower tray repair & resurfacing in Morton, Derbyshire

Problem with your shower tray in Morton? We repair it in place, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Staining and dullness across the tray
  • Chips or cracks by the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Morton

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Ventilate the room after showers
  • Rinse the tray after each shower
  • Keep harsh chemicals off the tray
  • Report any creaking or movement early

Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep an eye on the sealant so water can’t get underneath.

A tray that moves underfoot needs looking at, before it cracks or gets worse.

Shower tray repair in Morton without replacing anything

A cracked or chipped shower tray does not always need replacing. If it’s solid underneath, it can typically be repaired in place, saving you the cost and mess of a new one. We are frequently asked to fix a tray that flexes and staining and dullness across the tray, in acrylic, stone resin and cast iron.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.

Before and after: an old shower tray refinished by Surface Doctor
Area
Morton (DE55)
County
Derbyshire
Warranty
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

Prices and what affects them

Repairs from £95. Prices are worked out job by job, from your pictures. What matters most is:

  • Previous DIY repairs that have to come out
  • Unusual colours or finishes
  • How much damage there is
  • The material and finish

Our prices are the same across the UK, so there is no premium for Morton. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your pictures

It only takes a minute to photograph the damage. Try to send:

  • Any earlier repairs or coatings
  • Your postcode, so we can check dates
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Common problems we fix in Morton

Most cracked trays are trays that flex: without a solid, level base underneath, every shower puts strain on it. Chips normally come from dropped bottles.

Most people get in touch when they notice one of these:

  • Chipped corners or rims
  • A damaged area around the waste
  • A tray that flexes
  • Cracks running from the waste

Questions to ask before booking

  • If travel is included in the price
  • Whether they match the colour on site
  • Aftercare advice
  • Whether the price is fixed and includes VAT

Our hiring checklist

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

Honest limits

In fairness, some problems need a different fix:

  • Movement caused by a poor base, until the support is fixed
  • Leaking waste fittings
  • Water damage to the floor beneath the tray

Send us photos and we will tell you honestly before you book.

Materials we repair

  • Stone resin
  • Enamelled steel
  • Acrylic
  • Ceramic
  • Cast iron

Repairs by material

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.

Stone resin

Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and we match repairs to the surface finish.

Morton and nearby

Morton is about 6 miles west of Sutton in Ashfield, in Derbyshire. Whether you’re in the middle of Morton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 532 places across Derbyshire. You can also see our page for Manchester, about 41 miles away.

We cover every part of the DE55 postcode area and the streets around it. That includes homes on Station Road, Evershill Close and Evershill Lane. Other places close to Morton include Stonebroom (1 mile south), Pilsley (2 miles north-east), Westhouses (2 miles south-east), Lower Pilsley (2 miles north) and Blackwell (2 miles south-east). Within a short drive, we also cover Chesterfield (7 miles north), Ilkeston (12 miles south), Belper (8 miles south-west), Heanor (9 miles south), Dronfield (12 miles north) and Ripley (6 miles south).

Near you in Morton

In Morton, that means homes near Tibshelf Community School, Morton Primary School and Live and Let Live pub. Morton’s nearest station is Alfreton station, about 2.8 miles south of the centre. Nearby you will also find Clay Cross Hospital (2.1 miles north) and Clay Cross Urban District (1.9 miles north-west).

Map of Morton © OpenStreetMap contributors

FAQs for Morton

Do you come to Morton?

Yes. We cover the whole UK and come to Morton and the rest of Derbyshire. Send us photos for a fixed quote, or call 0345 017 0787.

Are there extra charges for Morton?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Do you redo the sealant?

Yes. We can repair and reseal on the same visit.

What areas do you cover?

The whole UK, including all of Derbyshire. Send your postcode with your photos and we’ll confirm dates.

How long before I can shower?

Normally by the following day. We’ll confirm before we leave.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

How do I get a price for shower tray repair in Morton?

Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Landlords, agents and businesses in Morton

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

For anyone letting property in or around Morton, we will quote for several properties at once. Just send photos for each address and we’ll price them together.

The process

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a few hours, or most of the day to resurface the whole tray. At the end we talk you through the curing time and the aftercare.

  1. We check the tray for movement first.
  2. The damaged area is cleaned and opened up.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. It’s left to cure, generally until the following day.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Let us know which floor the room is on
  • Ensure the room can be ventilated

Ask for a price

Send us a photo of the damage and one of the whole item, and tell us you’re in Morton, and we will come back with a fixed quote.

Get a fixed quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.