Hampshire · England
Shower Tray Repair in Rowner
Shower tray repair for Rowner, without a refit. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Snagging damage in a new bathroom
- Chips on the edges
What we’re called out for in Rowner
On timber floors, movement can crack a tray, particularly if it wasn’t fully bedded. On solid floors, cracks normally point to an uneven base.
The most common problems we’re called about are:
- A tray that flexes
- A damaged area around the waste
- Scratches from cleaning or grit
- Damage from a refit or building work
What your quote should include
- What happens if the damage is worse than the photos show
- How to care for the finish
- What protection goes down before work starts
- What preparation is included
How we handle shower tray repair in Rowner
A worn or stained tray can be resurfaced, giving it a fresh, even finish. We regularly repair ceramic, enamelled steel and acrylic, and the jobs we see most are edge chips from dropped bottles and a damaged area around the waste.
We stand behind the work with a one-year guarantee.
- Where
- Rowner (PO13, PO14)
- County
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
A repair is not right for every job, including:
- Plumbing leaks under the tray
- Water damage to the floor beneath the tray
- Trays cracked in several places
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic
- Cast iron
- Ceramic
- Stone resin
- Enamelled steel
Towns and villages near Rowner
Other services in Rowner
Rowner: your questions answered
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
How much does shower tray repair cost in Rowner?
Repairs from £95. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Can a cracked shower tray be repaired?
In most cases. If the tray moves, the support needs fixing first.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Rowner and nearby
Rowner is about 2 miles north-west of Gosport, in Hampshire. From the centre of Rowner to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 683 towns and villages across Hampshire. Our nearest city page is London, about 66 miles away.
Jobs in PO13 and PO14 are booked in the same way as anywhere else. Jobs here include addresses on Wych Lane, Camp Road and Keyes Road and the roads around them. We also cover the places around Rowner: Bridgemary (1 mile south-east), Peel Common (1 mile west), Crofton (1 mile west), Elson (1 mile south-east) and Lee-on-the-Solent (2 miles south-west). Further out, we also cover Havant (9 miles east), Eastleigh (12 miles north-west), Horndean (9 miles north-east), Chandler's Ford (15 miles north-west), Hedge End (9 miles north-west) and Waterlooville (8 miles north-east).
Near you in Rowner
We visit homes around Holbrook Primary School, The Green Dragon pub and St Matthew's, among other places. Nearby too are Bridgemary School (within half a mile north-east) and Baycroft School (1.3 miles west). For rail, the closest station is Fareham station, about 2.3 miles north of the centre. Well-known places in the area include Gosport War Memorial Hospital (2.3 miles south-east) and Portchester Castle (2.9 miles east). Open spaces near Rowner include West of the River Alver and Portsdown Hill.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, or most of a day for a full resurface. We clean up when we’re done and tell you when it’s ready to use.
- We check the tray is firmly supported and find the cause of any crack.
- The damaged area, or the entire tray, is cleaned and prepared.
- We fill and reinforce chips and cracks, then sand them flush.
- We colour-match the repair, or spray a new finish across the entire tray.
- We leave it to cure; the shower is normally usable the following day.
Getting ready for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Materials and what they mean for the repair
Stone resin
Stone resin is a dense, rigid material with a smooth gel coat. Poor support underneath leads to cracks, and chips are filled and matched to the surface.
Ceramic
Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and we match the gloss when we repair them.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We work for landlords, letting agents and housing providers in Rowner as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Get a moving tray checked
- Clean with washing-up liquid and a soft cloth
- Reseal when the silicone splits or turns black
- Do not stand heavy bottles on the tray
Keep heavy bottles off the tray floor, to avoid chips.
A tray that moves underfoot needs looking at, before it cracks.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What affects the price in Rowner
Repairs from £95. We give every job a fixed quote from pictures. These are the things that affect it:
- Any earlier repairs that need removing first
- How easy the damage is to reach
- The material and finish
- Whether it’s a chip, crack, burn or wear
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
When you take your pictures, these tips help us give you a firm price:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- A photo taken from further back
- A close-up of the damage, in focus
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
