Somerset · England

Sink & basin repair in Clewer, Somerset

Chip, crack and resurfacing work on bathroom sinks and basins for homeowners, landlords and businesses in Clewer. Send photos for a free, fixed quote.

  • Repairs from £95
  • A chipped vanity basin
  • A crack near the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Sink repair near Clewer

Signs you need sink repair in Clewer

Fine crazing in the glaze is typically down to age, and harsh cleaners can make it worse.

If you can see any of these, send us a photo:

  • An antique basin with chips
  • A chipped basin edge
  • Chips on a built-in basin
  • Fine cracks across the glaze

Comparing quotes

  • When it can be used again
  • Who will actually do the work
  • How long the guarantee is and what it covers
  • How your room will be protected

Our hiring checklist

Sink repair at your home in Clewer

It’s not just the colour we match, it’s the gloss, since a matt patch on a glossy basin is obvious. Repairs are polished to the same shine. We regularly repair Belfast and butler sinks, vanity unit basins and enamelled basins, and common reasons people get in touch are cracks starting at the waste and damage to a basin in a vanity unit.

A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.

Where
Clewer (BS28)
Area hub
Somerset
Warranty
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026
Chipped basin edge, before and after repair

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What we do, step by step

On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a few hours, including clearing up.

  1. First, we check the basin is firm and dry.
  2. We degrease and key the damage.
  3. Filler is built up and sanded flush.
  4. Colour and gloss are matched.
  5. We tidy up and give you the curing time.

How to prepare

  • Clear the area around the damage
  • Make sure the room can be ventilated
  • Tell us about any previous repairs or coatings

Get a quote

Email us a photo of the damage and one of the whole item, with your BS28 postcode, and we will reply with a fixed price.

Send pictures for a quote

Advice

Clewer and nearby

Clewer is about 7 miles north-west of Wells, in Somerset. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Our technicians cover all 640 towns and villages in Somerset, from the larger towns to small villages.

All of BS28 is covered, from the main roads to the quietest streets. Nearby, we also work in Crickham (1 mile south-west), Cocklake (1 mile south), Brinscombe (1 mile north-west), Alston Sutton (2 miles west) and Ashton (2 miles south-west). We also work in nearby towns such as Bridgwater (12 miles south-west), Burnham-on-Sea (8 miles west), Wells (7 miles south-east), Midsomer Norton (14 miles east), Shepton Mallet (12 miles south-east) and Street (10 miles south).

What’s near Clewer

We visit homes around The Kings of Wessex Academy and The Trotter Inn and the streets around them. Other landmarks nearby include Goughs Motor Museum (2.2 miles north-east). Open spaces near Clewer include Kingswood and Wavering Down.

Map of Clewer © OpenStreetMap contributors

How we price sink repair

Prices start from £95. You will not pay by the hour. The price is based on:

  • How much damage there is
  • Previous DIY repairs that have to come out
  • The material
  • Whether we combine several jobs

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.

Send photos for a quote

When you take your pictures, these tips help us give you a firm price:

  • A wider photo showing the entire basin
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus
  • Where you are, by postcode

If you’re in Clewer and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Repair or replace in Clewer?

A basin cracked through and leaking needs replacing. For chips, surface cracks and crazing, a repair is generally best. Our sink repair starts from £95. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why Clewer clients choose us

  • Fixed prices from your photos
  • Repair technicians who travel to you, UK-wide
  • Rooms protected and left tidy
  • Colour-matched on site

See our full price list.

How to look after the repair

To keep it looking its best for years:

  • Ask a plumber not to overtighten fittings
  • Use gentle cleaners
  • Steer clear of harsh chemicals
  • Store toiletries on a shelf

Use gentle cleaners and take care with heavy bottles and hair tools.

A crack near the taps can spread, so it’s worth having it checked quickly. If water is getting through, isolate the basin until it’s seen to.

Landlord and trade work in Clewer

Landlords, letting agents and housing providers in Clewer use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Questions from Clewer

Can you keep the maker’s mark?

Yes, carefully. Period basins are worth keeping, and we repair them sympathetically.

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Do the materials smell?

There may be a mild smell during the work.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Do you charge for travel?

We don’t add a call-out fee. The fixed price covers the visit and the work.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Can you price it without visiting?

Nearly always. If pictures do not show enough, we’ll ask for another angle.

What your basin is made of matters

Composite and resin

Cast mineral and resin basins are common in vanity units. They repair well, and the colour is mixed to suit.

Vitreous china

Ceramic basins have a hard, glassy glaze. Matching that shine is the key to a good repair, so we finish the repair to the same sheen.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.