Cornwall · England

Sink & basin repair in Helford Passage, Cornwall

Chip, crack and resurfacing work on bathroom sinks and basins for homeowners, landlords and businesses in Helford Passage. Free, fixed quotes from your pictures.

  • Repairs from £95
  • A chipped basin edge
  • An antique basin with chips
Surface Doctor technician refinishing the outside of a roll-top bath

Sink repair for Helford Passage homes

Sink repair in Helford Passage without replacing anything

From hairline cracks by the taps to chips on the rim, basin damage is normally repaired in place. The taps stay connected and the basin stays on the wall. If you’re dealing with cracks starting at the waste and damage from dropped bottles or hair tools, we can generally put it right, whatever the material.

Your repair is guaranteed for a year, as with every job we do.

Bathroom basin with a front-edge chip filled and colour matched
Where
Helford Passage (TR11)
County
Cornwall
Cover
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

Landlords, agents and businesses in Helford Passage

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Honest limits

To be straight with you, some problems need a different fix:

  • A basin cracked through and leaking
  • Widespread crazing
  • Plumbing leaks

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Helford Passage

  • Antique & period basins
  • Belfast and butler sinks
  • Vanity unit basins
  • Enamelled basins
  • Ceramic & vitreous china basins

Your questions about sink repair in Helford Passage

Can I add another job to the visit?

Of course, and it typically saves money. Send pictures of everything together and we will quote them together.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can you repair an antique basin?

Yes, carefully. We repair them without hiding their character.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

What happens once I’ve sent photos?

You will get a fixed quote back, typically with dates to choose from. You are under no obligation.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you repair something that is been repaired before?

Most of the time. Let us know what was used before.

Is a chipped basin repairable?

Yes, it’s one of our most common jobs. The repair is shaped and polished to blend in.

Repair or replace in Helford Passage?

A basin cracked through and leaking needs replacing. For chips and surface damage, repair is the better route. Our sink repair starts from £95. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Helford Passage

  • Generally one visit, start to finish
  • Same prices wherever you are
  • Rooms protected and left tidy
  • No need to remove anything

See our prices page.

What affects the price in Helford Passage

Prices start from £95. You’ll know the full cost before booking. We take into account:

  • Any earlier repairs that need removing first
  • How hard the colour is to match
  • How easy the damage is to reach
  • How much damage there is

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed quote

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • Your postcode, so we can check dates
  • Details of any past repairs
  • Natural light rather than flash
  • One sharp close-up of the damage

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Helford Passage and the surrounding area

Helford Passage is about 4 miles south-west of Falmouth, in Cornwall. Across the TR11 area, we come to you. Our technicians cover 644 places across Cornwall.

We work across TR11. You’ll find streets such as Budock Vean Lane, The Fairway and Anna Maria Lane, and we cover them all. We also cover the places around Helford Passage: Port Navas (1 mile west), Mawnan Smith (1 mile north-east), Carlidnack (1 mile north-east), Ponjeravah (2 miles north-west) and Bareppa (2 miles north-east). Within a short drive, we also cover Truro (11 miles north), Falmouth (4 miles north-east), Camborne (10 miles north-west), Redruth (10 miles north-west), Helston (6 miles west) and Hayle (14 miles north-west).

Around Helford Passage

Locally, our jobs take us to homes close to Ferryboat Inn and Mawnan CofE VA Primary School and the streets around them. For rail, the closest station is Penmere station, roughly 3.7 miles north-east of the centre. A little further out are Constantine Museum and Archive (2 miles north-west) and Falmouth Community Hospital (4 miles north-east). The countryside around Helford Passage includes Goonhilly Downs.

Map of Helford Passage © OpenStreetMap contributors

What your basin is made of matters

Composite and resin

Many vanity units have resin or composite basins. They repair well, and the colour is mixed to suit.

Vitreous china

Most basins are vitreous china with a hard, glossy glaze. The gloss is what makes a repair blend in, so we finish the repair to the same sheen.

What happens on the day

Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.

  1. First, we check the basin is firm and dry.
  2. The area is degreased and keyed.
  3. We build up the filler and sand it flush.
  4. We match the colour and the gloss.
  5. We tidy up and give you the curing time.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Mention any parking restrictions or tricky access
  • Keep children and pets away from the room on the day

How to get a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the basin, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Get a free quote

Read more

Looking after it afterwards

Most damage we see is avoidable. A few tips:

  • Clean with a soft cloth and mild detergent
  • Store toiletries on a shelf
  • Have new chips repaired quickly
  • Use a heat mat for hair tools

Keep hair straighteners and heavy bottles away from the basin edge, so it does not get chipped again.

Cracks by the tap holes can grow, so get it looked at early. If it’s leaking, turn off the water to the basin until it’s checked.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.