Cheshire East · England
Sink & basin repair in Mere, Cheshire East
Chip, crack and resurfacing work on bathroom sinks and basins at your home in Mere, with a one-year guarantee on every repair.
- Repairs from £95
- Chips from dropped toiletries
- Fine cracks across the glaze
Sink repair in Mere without replacing anything
Period basins are worth keeping, and we repair around makers’ marks where we can. A like-for-like replacement can be hard to find. Common call-outs are for damage from dropped bottles or hair tools and an antique basin with chips, in antique & period basins, enamelled basins and vanity unit basins.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Mere (WA16)
- County
- Cheshire East
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Mere and the surrounding area
Mere is about 2 miles north-west of Knutsford, in Cheshire East. Customers in Mere get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Mere is one of 254 towns and villages in Cheshire East we cover. Our nearest city page is Manchester, about 13 miles away.
Postcode districts we cover here: WA16. Whether you live on Ashley Road, Mereside Road and Clamhunger Lane or anywhere nearby, we can come to you. With the B5569 close by, Mere is simple for us to get to. We also cover the places around Mere: Tatton Dale (1 mile north-east), Rostherne (1 mile north), Knutsford (2 miles south-east), Ashley (3 miles north-east) and Mobberley (3 miles east). Further out, we also cover Macclesfield (12 miles south-east), Congleton (14 miles south-east), Wilmslow (7 miles east), Middlewich (10 miles south), Sandbach (13 miles south) and Poynton (12 miles east).
Landmarks near Mere
In Mere, that means homes near Knutsford Academy and St Paul's Church and the streets around them. The nearest railway station is Knutsford station, about 2.2 miles south-east. Further afield, we also cover the area around Cuckooland Museum (2.6 miles south-west) and Ullerwood Castle (4.3 miles east). For a walk, there is Black Moss Covert Nature Reserve.
Common problems we fix in Mere
Glaze crazing comes with age and temperature changes, and harsh cleaners can make it worse.
Keep an eye out for these signs:
- Cracks starting at the waste
- Knocks from hair straighteners
- Chips on the rim or front edge
- Damage to a basin in a vanity unit
What your quote should include
- Is the price fixed, and does it include VAT?
- Who turns up on the day
- Whether cleaning and preparation are in the price
- How to care for the finish
What your basin is made of matters
Period and antique
Older basins may have crazing, chips and makers’ marks. We repair them sympathetically and leave the character intact.
Composite and resin
Cast mineral and resin basins are common in vanity units. Chips and scratches can be filled and matched, and the colour is mixed to suit.
Aftercare tips
So the finish stays in good condition for years:
- Don’t stand heavy bottles on the edge
- Avoid abrasive pads
- Don’t overtighten taps
- Have new chips repaired quickly
A quick wipe after use helps, and avoid strong bleach or descalers.
Cracks by the tap holes can grow, so get it looked at early. If it’s leaking, turn off the water to the basin until it’s checked.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The vanity, floor and taps are protected.
- The damage is cleaned and prepared.
- We fill it and shape it to the basin’s curve.
- The colour is matched by hand.
- The repair is polished to the basin’s gloss and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Ensure the room can be ventilated
- Let us know if it has been repaired before
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the basin, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Your questions about sink repair in Mere
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Is a crack in a basin repairable?
Surface cracks can typically be repaired. If it leaks through, replacement is normally better.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you keep the maker’s mark?
Yes. We repair around makers’ marks where we can. Mention it when you ask for a quote.
Also in Mere
Repairing versus replacing in Mere
Matching a discontinued basin can be impossible, particularly if it matches the toilet and bath. A repair keeps your suite matching. Our sink repair starts from £95. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Mere
- Colour-matched on site
- Fixed prices from your pictures
- Most jobs done in one visit
- A year’s guarantee on all work
Read our full price list.
What sink repair costs
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- Access to the area
- Any earlier repairs that need removing first
- The size and number of damaged areas
- The material
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed quote
You can take the pictures on your phone. Make sure they show:
- What it’s made of, if you know
- One picture of the entire basin
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A crack that leaks right through the basin
- Leaking taps or wastes (a plumber’s job)
- Widespread crazing
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Ceramic & vitreous china basins
- Belfast and butler sinks
- Vanity unit basins
- Enamelled basins
- Antique & period basins
About our accreditations · Every repair comes with a one-year guarantee.
