Kent · England

Sink & basin repair in Winterbourne, Kent

Damaged basin in Winterbourne? We repair it in place, match it on site and guarantee the work for a year.

  • Repairs from £95
  • A crazed, tired basin
  • A chipped vanity basin
Surface Doctor technician refinishing the outside of a roll-top bath

Sink repair for Winterbourne homes

How we handle sink repair in Winterbourne

Chipped, cracked and crazed basins and vanity units can be repaired, matching the colour and gloss. The basin stays on the wall. Whether it’s crazing in the glaze and damage to a basin in a vanity unit, we can help.

Big or small, it’s backed by a one-year guarantee.

Location
Winterbourne (ME13)
Region
Kent
Guarantee
One year on every repair
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Repairs by material

Composite and resin

Cast mineral and resin basins are common in vanity units. Chips and scratches can be filled and matched, and the colour is mixed to suit.

Vitreous china

Ceramic basins have a hard, glassy glaze. Matching that shine is the key to a good repair, so we finish the repair to the same sheen.

How we price sink repair

Prices start from £95. We don’t charge extra for travel to Winterbourne. The price comes down to:

  • Doing more than one item at once
  • The size and number of damaged areas
  • How hard the colour is to match
  • The material and finish

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Quotes from your photos

When you take your pictures, a few simple things make all the difference:

  • Daylight if possible, and no flash reflection
  • A photo taken from further back
  • The material, if you know it
  • A coin beside the damage so we can judge size

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Aftercare tips

So the finish stays in good condition for years:

  • Use mild cleaners only
  • Avoid abrasive pads
  • Do not overtighten taps
  • Do not rest hot hair tools on the basin

Don’t rest hot hair tools or heavy bottles on the rim, to avoid new chips.

Chips near the waste or taps can let water in and stain. Early repair keeps it a small job.

Covering Winterbourne

Winterbourne is about 4 miles south-east of Faversham, in Kent. Jobs in Winterbourne are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Winterbourne is one of 922 towns and villages in Kent where we work. Our jobs stretch from Winterbourne to London (about 48 miles away).

Every address in ME13 is within our area. If you’re just outside Winterbourne, we cover Hickmans Green (1 mile north-west), Oversland (1 mile south-west), South Street (1 mile west), Boughton under Blean (1 mile north) and Crouch (1 mile west). Within a short drive, we also cover Ashford (11 miles south), Canterbury (5 miles east), Sittingbourne (11 miles north-west), Whitstable (6 miles north-east), Faversham (4 miles north-west) and Herne Bay (9 miles north-east).

Near you in Winterbourne

In Winterbourne, that means homes near Mount Ephraim Gardens, Boughton-under-Blean and Dunkirk Primary School and The Queens Head pub and the streets around them. For rail, the closest station is Selling station, roughly 1 mile south-west. Well-known places in the area include Chilham Castle (2.9 miles south) and Eastbridge Hospital of St Thomas the Martyr (5.1 miles east). Green spaces nearby include Blean Woods RSPB Reserve.

Map of Winterbourne © OpenStreetMap contributors

Repairing versus replacing in Winterbourne

A new basin may mean new taps, a new waste and new tiling, and if it’s part of a suite, it may not match. A repair avoids all of that. Our sink repair starts from £95. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.

Why us?

  • Colour-matched on site
  • Most jobs done in one visit
  • A fixed quote before you book
  • One price list for the entire UK

See our prices page.

Common questions in Winterbourne

Can you keep the maker’s mark?

Yes. We repair around makers’ marks where we can. Tell us about it when you send pictures.

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

Does someone need to be in?

We need someone to let us in. You do not need to watch us work.

Is a chipped basin repairable?

Yes. We fill the chip, colour-match it and polish it to the basin’s gloss.

Will you remove the sink?

Not at all. The surrounding area is protected and we work in place.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Is repairing better than replacing?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Landlords, agents and businesses in Winterbourne

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.

  1. The vanity, floor and taps are protected.
  2. We clean and prepare the chip or crack.
  3. We fill it and shape it to the basin’s curve.
  4. The colour is matched by hand.
  5. The repair is polished to the basin’s gloss and left to cure.

Getting ready for the visit

  • Open a window if you can
  • Make sure the area is dry
  • Tell us if there are stairs or a lift

How to get a price

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.

Send pictures for a quote

Read more

What a repair can’t fix

Some jobs aren’t right for a repair, including:

  • A basin cracked through and leaking
  • A basin coming away from the wall (that needs refixing)
  • Plumbing leaks

Not sure? Send pictures and we will give you a straight answer before you book.

What we work on

  • Ceramic & vitreous china basins
  • Belfast and butler sinks
  • Antique & period basins
  • Enamelled basins
  • Vanity unit basins
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.