Aberdeenshire · Scotland

uPVC window & door repair in Alford, Aberdeenshire

uPVC repair across Alford and nearby, done in a single visit in most cases.

  • Repairs from £95
  • Scratches from ladders and furniture
  • Chips and dents
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair for Alford homes

When we’d advise against a repair

Before booking, it’s worth knowing the limits:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Doors & door panels
  • Conservatory frames
  • White uPVC
  • Window frames & sills
  • Coloured and woodgrain uPVC

How we handle uPVC repair in Alford

Builders and developers use us for snagging repairs too. We fill and refinish the damage so it blends into the frame, including woodgrain finishes. We work on window frames & sills, white uPVC and doors & door panels, and the jobs we see most are damage during building work and holes from removed fittings and alarms.

The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Where
Alford (AB33)
Area hub
Aberdeenshire
Warranty
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
White panel with a damaged edge, shown before and after repair

Should you replace it?

A new window, door or sill costs far more, and it may not match the rest after years of weathering. A repair keeps the original. Prices start from £95. Our prices are the same across the UK, so there is no premium for Alford. What changes the price is the job itself: the material, the amount of damage and how many items.

Why choose Surface Doctor in Alford

  • A year’s guarantee on all work
  • Most jobs done in one visit
  • Everything repaired in place
  • Free fixed quotes from pictures

Take a look at our pricing.

What affects the price in Alford

Repairs from £95. Prices are worked out job by job. The main factors are:

  • Previous DIY repairs that have to come out
  • How many areas need work
  • Whether it’s a chip, crack, burn or wear
  • The material and finish

Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Quotes from your pictures

Most quotes are done from pictures alone. To help us price it:

  • Your postcode, so we can check dates
  • A coin or ruler next to the damage for scale
  • One sharp close-up of the damage
  • Any details about the material

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

When to call us in Alford

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and removed fittings leave holes.

Contact us if you’ve noticed:

  • Chips and dents
  • Scratches from ladders and furniture
  • Burns on sills
  • Damage during building work

Comparing quotes

  • Whether a trained technician does the job
  • The length of the guarantee and what it covers
  • How long it needs to cure
  • Whether the price covers travel

Our hiring checklist

About Alford

Alford is about 13 miles west of Inverurie, in Aberdeenshire. Customers in Alford get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Our technicians cover 161 places in Aberdeenshire.

Postcode districts we cover here: AB33. That includes homes on Main Street, Montgarrie Road and Victoria Road. Alford is on the A944, which makes it straightforward to reach. Neighbouring places we cover include Forbes (1 mile north-west), Bridge of Alford (1 mile north-west), Tullynessle (2 miles north-west), Kirkton of Tough (3 miles south-east) and Auchleven (6 miles north-east). Larger places within reach include Inverurie (13 miles east), Banchory (15 miles south-east), Huntly (15 miles north), Garioch (13 miles east), Kemnay (10 miles east) and Kintore (13 miles east).

What’s near Alford

Typical jobs here are in homes near St Andrew's Episcopal Church and Alford Academy. Nearby you’ll also find Grampian Transport Museum (less than half a mile east) and Asloun Castle (2.2 miles west). For a walk, there is Coiliochbar Hill.

Map of Alford © OpenStreetMap contributors

DIY repairs versus a professional job

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

Landlords, agents and businesses in Alford

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Common questions in Alford

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

How much does uPVC repair cost in Alford?

Repairs from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your AB33 postcode.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

Is there a call-out fee?

There is no separate call-out charge. The fixed price covers the visit and the work.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you quote from pictures?

Generally, yes. Clear photos let us give you a fixed quote without visiting.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

What we do, step by step

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.

  1. First the frame or panel is cleaned.
  2. Next we fill the damage.
  3. We smooth the repair.
  4. We colour-match the finish, including woodgrain effects.
  5. We blend the repair into the surrounding surface.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Keep a parking space free if you can
  • Make sure the area is dry

How to get a price

The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say immediately if a repair is the right fix.

Get a fixed price

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.