Kent · England
uPVC window & door repair in Ashbank, Kent
Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for homes and businesses in Ashbank and across Kent. Send photos for a free, fixed quote.
- Repairs from £95
- Scratches from ladders and furniture
- Chips and dents
uPVC repair at your home in Ashbank
We also do snagging repairs for builders. The damage is filled and refinished to match the frame, including woodgrain finishes. If you’re dealing with damage during building work and holes from removed fittings and alarms, we can normally put it right, on white uPVC, conservatory frames and coloured and woodgrain uPVC alike.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.
- Where
- Ashbank (ME17)
- Region
- Kent
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
About Ashbank
Ashbank is about 4 miles east of Maidstone, in Kent. Jobs in Ashbank are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We cover all 922 towns and villages in Kent, from the larger towns to small villages. You can also see our page for London, about 35 miles away.
Jobs in ME17 are booked in the same way as anywhere else. That includes homes on George Lane and Wykeham Grove. Other places close to Ashbank include Leeds (1 mile south-west), Broomfield (1 mile south-east), Eyhorne Street (1 mile north-east), Chegworth (1 mile east) and Hollingbourne (2 miles north-east). Larger places within reach include Maidstone (4 miles west), Ashford (13 miles south-east), Sittingbourne (8 miles north-east), Tonbridge (15 miles west), Faversham (12 miles east) and Minster (14 miles north-east).
What’s near Ashbank
Typical jobs here are in homes near Leeds and Broomfield Church of England Primary School, St Nicholas's Church and The George Inn and the streets around them. The closest station to Ashbank is Hollingbourne station, about 1.1 miles north-east of the centre. Further afield, we also cover the area around KIMS hospital (3.6 miles north-west) and The Dog Collar Museum (0.6 miles east). The countryside around Ashbank includes Detling Hill.
When we’d advise against a repair
Some jobs are not right for a repair, for example:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Ashbank
- Conservatory frames
- Coloured and woodgrain uPVC
- Doors & door panels
- Window frames & sills
- White uPVC
Towns and villages near Ashbank
What else we do in Ashbank
Questions from Ashbank
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you come to Ashbank?
Yes. We cover the whole UK and travel to Ashbank and the rest of Kent. Send us photos for a fixed quote, or call 0345 017 0787.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can you redo someone else’s repair?
Usually, yes. The old repair comes out first, so let us know about it.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Kent.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Repairing versus replacing in Ashbank
A new window, door or sill costs far more, and new uPVC may not match the weathered frames around it. Repairing the damage keeps the original. Prices start from £95. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- One price list for the whole UK
- We’ll tell you if it’s not worth repairing
- Fixed prices from your photos
- CHAS and Constructionline accredited
Take a look at our full price list.
What we are called out for in Ashbank
uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and old fittings leave holes.
Keep an eye out for these signs:
- Burns on sills
- Chips and dents
- Scratches from ladders and furniture
- Holes from removed fittings and alarms
Before booking anyone
- How to look after the finish
- How changes to the job are handled
- What preparation is included
- How soon you can use it again
Prices and what affects them
Prices start from £95. There is no area surcharge for Ashbank. What changes the price is:
- Unusual colours or finishes
- Access to the area
- The material
- Whether we combine several jobs
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
You can typically get a fixed price without us visiting. To make it quick:
- Where you are, by postcode
- Something in shot to show the size
- The material, if you know it
- A photo taken from further back
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.
Landlord and trade work in Ashbank
Landlords, letting agents and housing providers in Ashbank use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What we do, step by step
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- We clean the frame or panel.
- Scratches, chips and holes are filled.
- We sand the repair smooth.
- We colour-match the finish, including woodgrain effects.
- Finally we blend it into the rest of the frame.
Getting ready for the visit
- Clear the area around the damage
- Make sure the area is dry
- Tell us if there are stairs or a lift
Get a quote
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
