Shropshire · England

uPVC window & door repair in Bearstone, Shropshire

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for householders, landlords and businesses in Bearstone. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Chips and dents
  • Scratches from ladders and furniture
Surface Doctor technician repairing a wooden kitchen worktop

Book uPVC repair in Bearstone

How we price uPVC repair

Prices start from £95. We charge the same across the UK, including Bearstone. What changes the price is:

  • Doing more than one item at once
  • The size and number of damaged areas
  • Whether old repairs or coatings need taking off
  • Access to the area

A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.

Getting a price from pictures

You can normally get a fixed price without us visiting. To make it quick:

  • A picture taken from further back
  • Details of any past repairs
  • The postcode, so we can plan the visit
  • Good light, ideally daylight, without flash glare

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole window, door or sill, we can give you a fixed price without visiting.

About our uPVC repair in Bearstone

The damage is filled and refinished to match the frame, including woodgrain finishes. We also do snagging repairs for builders. Typical jobs include scratches from ladders and furniture and chips and dents, in coloured and woodgrain uPVC, window frames & sills and conservatory frames.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right. Warm soapy water and a soft cloth are all it needs. Do not use solvents or scourers.

Damaged white panel edge repaired, before and after
Location
Bearstone (TF9)
Area hub
Shropshire
Guarantee
12 months on all our work
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

DIY kit or professional repair?

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What happens on the day

Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and the room is left clean and tidy.

  1. We start by cleaning the frame.
  2. Next we fill the damage.
  3. We sand the repair smooth.
  4. The finish is colour matched, woodgrain included.
  5. Finally we blend it into the rest of the frame.

How to prepare

  • Point us to the nearest place to park
  • Open a window if you can
  • Mention any earlier repairs or resurfacing

How to get a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Get a fixed price

Related advice

Repair or replace: which is better?

Replacing the frame or sill costs far more, and it may not match the rest after years of weathering. A repair leaves the unit in place. Our uPVC repair starts from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

What you get with us

  • Same prices wherever you are
  • Accredited with CHAS, Constructionline and SafeContractor
  • Most jobs done in one visit
  • Honest advice, even when it means no job

Read our prices page.

What we cannot put right

To be straight with you, there are a few things a repair will not fix:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send photos and we’ll give you a straight answer before you book.

Materials we work on in Bearstone

  • Coloured and woodgrain uPVC
  • Doors & door panels
  • Conservatory frames
  • Window frames & sills
  • White uPVC

Questions from Bearstone

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

When can you do it?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

What happens once I’ve sent pictures?

You get a fixed price and available dates. If we need another angle, we will ask.

Do you cover Bearstone?

We do. Repair technicians travel to Bearstone from across the region, and the price is the same as everywhere else.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What does uPVC repair cost?

Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

Can you match woodgrain uPVC?

Yes. We recreate the colour and grain by hand.

Common problems we fix in Bearstone

uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.

Signs it’s time to call us include:

  • Damage during building work
  • Chips and dents
  • Burns on sills
  • Holes from removed fittings and alarms

Questions to ask before you book

  • How long it needs to cure
  • What happens if the damage is worse than the photos show
  • How your room will be protected
  • Whether they match the colour on site

10 questions to ask before booking

Landlord and trade work in Bearstone

Housing associations and facilities teams use us for planned and reactive repairs in Shropshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.

Our work in Bearstone

Bearstone is about 5 miles north-east of Market Drayton, in Shropshire. Wherever you are in the TF9 postcode area, we carry out the work at your property. Our technicians cover 433 places across Shropshire, from the larger towns to small villages. We work right across the region, from Bearstone to Manchester (about 37 miles away).

Jobs in TF9 are booked in the same way as anywhere else. We also travel to Knighton (1 mile north-east), Napley (1 mile south-west), Norton in Hales (2 miles south-west), Mucklestone (2 miles south) and Woore (2 miles north). Larger places within reach include Market Drayton (5 miles south-west), Whitchurch (11 miles west), Wem (15 miles south-west), Shawbury (15 miles south-west), Prees Higher Heath (10 miles west) and Hinstock (8 miles south).

Around Bearstone

Locally, our jobs take us to homes close to White Lion pub. Well-known places in the area include Castle Hill (2.9 miles south-east).

Map of Bearstone © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.