Kent · England

uPVC window & door repair in Cold Harbour, Kent

We travel to Cold Harbour for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Burns on sills
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Cold Harbour

Prices and what affects them

Prices start from £95. There’s no charge for travel to Cold Harbour. The price comes down to:

  • Doing more than one item at once
  • The material
  • How many areas need work
  • Previous DIY repairs that have to come out

Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Getting a price from photos

When you take your pictures, these tips help us give you a firm price:

  • The postcode, so we can plan the visit
  • Whether it’s been repaired or coated before
  • A coin or ruler next to the damage for scale
  • Daylight if possible, and no flash reflection

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole window, door or sill, we can give you a fixed quote the same day in most cases.

About our uPVC repair in Cold Harbour

Builders and developers use us for snagging repairs too. The damage is filled and refinished to match the frame, woodgrain finishes included. Typical jobs include chips and dents and holes from removed fittings and alarms, in coloured and woodgrain uPVC, white uPVC and doors & door panels.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it. Warm soapy water and a soft cloth are all it needs. Do not use solvents or scourers.

Before and after: a chipped white edge filled and refinished
Where
Cold Harbour (ME17)
Region
Kent
Warranty
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

Repair or replace in Cold Harbour?

A new window, door or sill is a much bigger job, and it may not match the rest after years of weathering. Repairing the damage leaves the unit in place. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Why Cold Harbour customers choose us

  • Free fixed quotes from pictures
  • We’ll tell you if it’s not worth repairing
  • Every repair guaranteed for a year
  • One price list for the whole UK

Take a look at our pricing.

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Covering Cold Harbour

Cold Harbour is about 7 miles south-west of Faversham, in Kent. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Our repair technicians cover 922 places across Kent, from the larger towns to small villages. We work right across the region, from Cold Harbour to London (42 miles away).

We work across the ME17 postcode area and the streets around it. Neighbouring places we cover include Warren Street (1 mile north-west), Payden Street (1 mile north-west), Lenham Heath (2 miles south-west), Charing Heath (2 miles south) and Lenham Forstal (2 miles south-west). Further out, we also cover Maidstone (11 miles west), Ashford (8 miles south-east), Canterbury (14 miles east), Sittingbourne (7 miles north), Whitstable (14 miles north-east) and Faversham (7 miles north-east).

Local landmarks in Cold Harbour

Around Cold Harbour, we work in homes near Spuckles and Kennelling Woods, Church of St Lawrence and The Harrow pub. For rail, the closest station is Charing station, roughly 2.3 miles south. Nearby you’ll also find Newnham Castle (3.4 miles north).

Map of Cold Harbour © OpenStreetMap contributors

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send photos and we’ll say what we think before booking.

What we work on

  • White uPVC
  • Window frames & sills
  • Coloured and woodgrain uPVC
  • Doors & door panels
  • Conservatory frames

Do you need uPVC repair in Cold Harbour?

uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.

Clients usually contact us about:

  • Scratches from ladders and furniture
  • Burns on sills
  • Damage during building work
  • Chips and dents

Before you book anyone

  • Is the price fixed, and does it include VAT?
  • How to look after the finish
  • What happens if the damage is worse than the photos show
  • Who turns up on the day

Our hiring checklist

Landlord and trade work in Cold Harbour

If you manage property in Cold Harbour, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.

Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

What happens on the day

We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.

  1. We start by cleaning the frame.
  2. Next we fill the damage.
  3. The repair is sanded smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. Finally we blend it into the rest of the frame.

Preparing for the visit

  • Keep a parking space free if you can
  • Let us know which floor the room is on
  • Let the surface dry out before the visit

How to get a price

To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.

Send photos for a quote

Advice

Common questions in Cold Harbour

How do I book?

Just pictures, your postcode and a contact number. On the day, access to the room.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders in Cold Harbour.

Is my repair covered?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Do you work in Cold Harbour?

Yes. We cover the whole UK and come to Cold Harbour and the rest of Kent. Send photos and we’ll quote, or call 0345 017 0787.

Which areas do you work in?

Everywhere in the UK, Cold Harbour included. There is no extra charge for travel.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What if the damage is worse than the pictures show?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.