Cambridgeshire · England

uPVC window & door repair in Coton, Cambridgeshire

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for householders, landlords and businesses in Coton. Free, fixed quotes from your photos.

  • Repairs from £95
  • Burns on sills
  • Chips and dents
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair for Coton homes

Signs you need uPVC repair in Coton

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and removed fittings leave holes.

Contact us if you’ve noticed any of these:

  • Holes from removed fittings and alarms
  • Scratches from ladders and furniture
  • Chips and dents
  • Damage during building work

Comparing quotes

  • Whether they match the colour on site
  • How to look after the finish
  • What prep work is covered
  • The length of the guarantee and what it covers

Choosing a repair company

uPVC repair in Coton, done in place

Builders and developers use us for snagging repairs too. We fill and refinish the damage so it blends into the frame, including woodgrain finishes. Common call-outs are for damage during building work and holes from removed fittings and alarms, on coloured and woodgrain uPVC, window frames & sills and conservatory frames.

You get a one-year guarantee, the same in Coton as everywhere else we work. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Damaged white panel edge repaired, before and after
Where
Coton (CB23)
Region
Cambridgeshire
Warranty
One year on every repair
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

What we cannot put right

We would rather lose a job than do one that will not last, so these are the limits:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us pictures and we will tell you honestly before you book.

Materials we repair

  • Doors & door panels
  • White uPVC
  • Conservatory frames
  • Coloured and woodgrain uPVC
  • Window frames & sills

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

What happens on the day

We begin by going over the job with you. After that, protection goes down around the work area and we start. You can expect it to take a few hours.

  1. We start by cleaning the frame.
  2. Next we fill the damage.
  3. We sand the repair smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. We blend the repair into the surrounding surface.

How to prepare

  • Move bottles, mats and clutter away from the area
  • Let us know about parking or access
  • Keep pets and children out of the room while we work

How to get a price

To get a price, send two or three pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Send pictures for a quote

Read more

FAQs for Coton

What areas do you cover?

Across the UK. Our prices are the same everywhere.

Do you work in Coton?

Yes, we do. Technicians travel to Coton from across the region, with no extra charge for travel.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Can you match woodgrain uPVC?

Yes. Colour and grain are matched by hand.

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Can you quote from photos?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Where we work around Coton

Coton is about 3 miles west of Cambridge, in Cambridgeshire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Coton is one of 371 towns and villages in Cambridgeshire where we work. We work right across the region, from Coton to London (about 49 miles away).

Jobs in CB23 work the same way as everywhere else we cover. From High Street, St Peter's Road and Benny's Way or a nearby road, a technician can come to you. If you are just outside Coton, we cover Madingley (1 mile north-west), Eddington (1 mile north-east), Howes (2 miles north-east), Girton (2 miles north-east) and Hardwick (2 miles west). We also work in nearby towns such as Cambridge (3 miles east), St Neots (14 miles west), Huntingdon (13 miles north-west), St Ives (10 miles north-west), Newmarket (15 miles east) and Royston (11 miles south).

Around Coton

Our customers here include homes close to Church of St Peter and the streets around them. The closest station to Coton is Cambridge station, about 3.5 miles east. A little further out are Grand Arcade (2.7 miles east) and Nuffield Health Cambridge Hospital (3.1 miles south-east). The countryside around Coton includes Skaters' Meadow.

Map of Coton © OpenStreetMap contributors

Repair or replace in Coton?

A new window, door or sill costs far more, and it may not match the rest after years of weathering. Repairing the damage keeps the original. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why us?

  • A year’s guarantee on all work
  • Free fixed quotes from pictures
  • Accredited with CHAS, Constructionline and SafeContractor
  • No extra charge for your area

Read our prices page.

Work for landlords and builders

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

How we price uPVC repair

Prices start from £95. We don’t charge extra for travel to Coton. The price comes down to:

  • How many items we do on one visit
  • The material
  • Access to the area
  • The colour and finish to match

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

Quotes from your pictures

The better the photos, the more accurate the price. Here’s what helps:

  • Any details about the material
  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area

Most customers in Coton get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.