Shropshire · England

uPVC window & door repair in Cressage, Shropshire

We travel to Cressage for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Chips and dents
Surface Doctor technician repairing a wooden kitchen worktop

Need uPVC repair in Cressage?

Prices and what affects them

Prices start from £95. Each job gets its own fixed price. These are the things that affect it:

  • The size and number of damaged areas
  • The material and finish
  • How hard the colour is to match
  • The type of damage

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Send photos for a quote

Two or three clear pictures are normally enough. It helps if you send:

  • Details of any past repairs
  • One sharp close-up of the damage
  • Natural light rather than flash
  • A wider photo showing the entire window, door or sill

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole window, door or sill, we can give you a fixed quote the same day in most cases.

uPVC repair in Cressage, done in place

We fill and refinish the damage to match the frame, woodgrain finishes included. Builders and developers use us for snagging repairs too. Typical jobs include scratches from ladders and furniture and chips and dents, in coloured and woodgrain uPVC, conservatory frames and doors & door panels.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it. Clean with warm soapy water and a soft cloth. Don’t use solvents or scourers.

Before and after: a chipped white edge filled and refinished
Location
Cressage (SY5)
Area hub
Shropshire
Warranty
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

How it works

Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes a few hours for most jobs. The room is left tidy.

  1. We clean the frame or panel.
  2. We fill scratches, chips and holes.
  3. We sand the repair smooth.
  4. We match the colour, including woodgrain finishes.
  5. The repair is blended into the surface around it.

Before we arrive

  • Point us to the nearest place to park
  • Open a window if you can
  • Let us know if it has been repaired before

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the whole window, door or sill, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a free quote

Read more

Do you need uPVC repair in Cressage?

uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and old fittings leave holes.

The things customers normally mention when they call are:

  • Holes from removed fittings and alarms
  • Chips and dents
  • Damage during building work
  • Scratches from ladders and furniture

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • What happens if they find more damage
  • Aftercare advice
  • How long the guarantee is and what it covers

Choosing a repair company

Repairing versus replacing in Cressage

Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. Repairing the damage keeps the original. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.

Why choose Surface Doctor in Cressage

  • Generally one visit, start to finish
  • Fixed prices from your photos
  • CHAS and Constructionline accredited
  • A year’s guarantee on all work

Read our prices page.

About Cressage

Cressage is about 7 miles south-west of Telford, in Shropshire. Across the SY5 area, a technician comes to you. We cover 433 places in Shropshire, from the larger towns to small villages. Our jobs stretch from Cressage to Birmingham (about 32 miles away).

Here we cover the SY5 postcode area. That includes homes on Harley Road, The Moors and Crown Lane. Neighbouring places we cover include Eaton Constantine (2 miles north), Garmston (2 miles north-east), Leighton (2 miles north-east), Coundarbour (2 miles north-west) and Homer (2 miles south-east). Further out, we also cover Shrewsbury (8 miles north-west), Madeley (7 miles east), Bridgnorth (10 miles south-east), Coleham (8 miles north-west), Kingsland (8 miles north-west) and Belle Vue (8 miles north-west).

Near you in Cressage

Locally, our jobs take us to homes close to The Eagles Inn, Christ Church CofE Primary School and Christ Church. Other landmarks nearby include Much Wenlock Museum (3.2 miles south-east) and Acton Burnell Castle (3.8 miles west). Green spaces nearby include The Ercall.

Map of Cressage © OpenStreetMap contributors

Landlords, agents and businesses in Cressage

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Window frames & sills
  • White uPVC
  • Conservatory frames
  • Doors & door panels
  • Coloured and woodgrain uPVC

Common questions in Cressage

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

What does uPVC repair cost?

Prices start from £95. Because every job differs, we price from photos. You’ll get a fixed figure before booking.

Will the price change on the day?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Can you quote from pictures?

Typically, yes. Clear photos let us give you a fixed price without visiting.

Do you work in Cressage?

Yes, we do. Technicians travel to Cressage from across the region, and the price is the same as everywhere else.

What information do you need?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.