Pembrokeshire · Wales
uPVC Repair for Dale homes
Scratch, chip, burn and hole repairs to uPVC windows, doors and sills at your home in Dale, with a one-year guarantee on every repair.
- Repairs from £95
- Damage during building work
- Chips and dents
How we handle uPVC repair in Dale
We fill and refinish the damage to match the frame, including woodgrain finishes. Builders and developers use us for snagging repairs too. Common call-outs are for burns on sills and chips and dents, across white uPVC, window frames & sills and coloured and woodgrain uPVC.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it. Warm soapy water and a soft cloth are all it needs. Do not use solvents or scourers.
- Where
- Dale (SA62)
- Region
- Pembrokeshire
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
We won’t take on work that will not last, so these are the limits:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Dale
- White uPVC
- Conservatory frames
- Coloured and woodgrain uPVC
- Doors & door panels
- Window frames & sills
Landlord and trade work in Dale
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Covering Dale
Dale is about 6 miles west of Milford Haven, in Pembrokeshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Dale is one of 223 towns and villages in Pembrokeshire we cover.
All of SA62 is covered, from the main roads to the quietest streets. You’ll find streets such as Blue Anchor Way, South Street and Castle Way. If you’re just outside Dale, we cover Townsend (1 mile north-east), St Ishmael's (2 miles north-east), Marloes (2 miles north-west), Hasguard (4 miles north-east) and Hasguard Cross (4 miles north-east). We also work in nearby towns such as Haverfordwest (11 miles north-east), Milford Haven (6 miles east), Pembroke (11 miles east), Pembroke Dock (10 miles east), The Marsh (11 miles north-east) and Green (11 miles east).
Near you in Dale
Around Dale, we work in homes near The Griffin Inn and Church of Saint James the Great. A little further out are Dale Castle (under half a mile west). Green spaces nearby include Brunt Farm Hill.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Why repair rather than replace?
A new window, door or sill costs far more, and it may not match the rest after years of weathering. A repair leaves the unit in place. Our uPVC repair starts from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Dale
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
- Honest advice, even when it means no job
- Technicians who travel to you, UK-wide
Read our pricing.
What affects the price in Dale
Prices start from £95. We don’t charge extra for travel to Dale. The price comes down to:
- How many items we do on one visit
- What kind of damage it is
- The material and finish
- Access to the area
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- A coin beside the damage so we can judge size
- Any details about the material
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
A quote takes minutes to ask for: take one close-up and one wider shot of the window, door or sill, include your postcode and send them over. You will get a fixed quote, not an estimate.
FAQs for Dale
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Which areas do you work in?
We work UK-wide. Prices do not change with location.
Is a repair better than a new one?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Are there extra charges for Dale?
Travel is included in the price, and we charge the same wherever you are.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Do you need uPVC repair in Dale?
uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and old fittings leave holes.
Send us a photo if you notice any of these:
- Scratches from ladders and furniture
- Damage during building work
- Chips and dents
- Holes from removed fittings and alarms
Before you book anyone
- Whether cleaning and preparation are in the price
- How the colour is matched
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
What happens on the day
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a few hours. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We clean the frame or panel.
- We fill scratches, chips and holes.
- The repair is sanded smooth.
- We colour-match the finish, including woodgrain effects.
- The repair is blended into the surface around it.
Before we arrive
- Make sure the room can be ventilated
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
Ask for a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Related advice
Other services in Dale
About our accreditations · Every repair comes with a one-year guarantee.
