Hampshire · England
uPVC Repair in Deadwater
Damaged window, door or sill in Deadwater? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Chips and dents
- Holes from removed fittings and alarms
uPVC repair in Deadwater without replacing anything
We also do snagging repairs for builders. We fill and refinish the damage to match the frame, including woodgrain finishes. Our technicians work on window frames & sills, coloured and woodgrain uPVC and white uPVC, and the jobs we see most are chips and dents and scratches from ladders and furniture.
Whatever the size of the job, it’s backed by a one-year guarantee in Deadwater and across Hampshire. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.
- Area
- Deadwater (GU35)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Window frames & sills
- Coloured and woodgrain uPVC
- Conservatory frames
- White uPVC
- Doors & door panels
Repair or replace in Deadwater?
Replacing the frame or sill costs far more, and it may not match the rest after years of weathering. A repair keeps the original. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- A fixed quote before booking
- One visit for most repairs
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
Take a look at our full price list.
Also near Deadwater
Also in Deadwater
What we do, step by step
Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- We clean the frame or panel.
- We fill scratches, chips and holes.
- We smooth the repair.
- The finish is colour-matched, woodgrain included.
- Finally we blend it into the rest of the frame.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.
Read more
Where we work around Deadwater
Deadwater is about 1 mile east of Bordon, in Hampshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages. Our jobs stretch from Deadwater to London (about 42 miles away).
We cover every part of the GU35 postcode area and the streets around it. Whether you live on Alma Road, Varna Road and Rowan Road or anywhere nearby, a technician can come to you. We also travel to Lindford (1 mile north-east), Bordon (1 mile west), Hollywater (1 mile south), Standford (1 mile south-east) and Pinewood Village (1 mile north-west). Within a short drive, we also cover Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (6 miles north-west) and Petersfield (8 miles south-west).
Near you in Deadwater
Around Deadwater, we work in homes near Weyford Nursery and Primary School, Mill Chase Academy and St Mark's Sacred Church. The closest station to Deadwater is Liphook station, about 3.6 miles south-east of the centre. Further afield, we also cover the area around Chase Community Hospital (0.7 miles south-west). Not far away are Deadwater Valley and Selborne Hill.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Questions from Deadwater
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is it worth repairing rather than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What areas do you cover?
We cover the entire UK, including Deadwater and the rest of Hampshire. Send your postcode with your pictures and we will confirm dates.
Do you cover Deadwater?
Yes. We cover the whole UK and come to Deadwater. Send photos and we will quote, or call 0345 017 0787.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Hampshire.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Landlords, agents and businesses in Deadwater
If you manage property in Deadwater, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Common problems we fix in Deadwater
uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.
The most common problems we’re called about are:
- Scratches from ladders and furniture
- Chips and dents
- Holes from removed fittings and alarms
- Damage during building work
What to look for in a quote
- What protection goes down before work starts
- What prep work is covered
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
What affects the price in Deadwater
Prices start from £95. Prices are worked out job by job, from your photos. The main factors are:
- The type of damage
- The colour and finish to match
- Whether we combine several jobs
- The material and finish
We charge the same wherever you are, so there’s no premium for Deadwater. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- A clear, close picture of the problem area
- Natural light rather than flash
- A coin beside the damage so we can judge size
- One picture of the entire window, door or sill
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
